Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

AC Powered Potentiometer Input DIN Rail Signal Conditioner

DRI-PT

Pot Input Transmitter | DRI-PT

Pot Input Transmitter

436,47 DRI-PT

1 anno di garanzia CE
  • 3-Way Isolation, Eliminates Earth Loop Issues
  • Accepts Potentiometers from 100 Ω to 100 kΩ
  • Universal AC Power 85 to 265 Vac
  • Wide Ranging Zero and Span
  • Plug-In Terminals
Processo di misura e strumenti di controllo - Visualizza i prodotti correlati

Descrizione

The DRI-PT is a DIN rail mount, potentiometer input, signal conditioner with 1800 Vdc isolation between AC power and the input/output circuitry. The input provides a constant voltage and is designed to accept any 3-wire potentiometer from 100 Ω to 100 kΩ. The output is switch selectable for a 0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA or 4 to 20 mA DC signal.

Up to 80% adjustment of offset and gain is available to transmit a full scale output from any 20% portion of the potentiometer input.

The DRI-PT is useful in transmitting process control set-points to remote PID controllers or interfacing position or level sensors to data acquisition and control systems. The high density DIN rail mounting offers an extremely compact solution for saving valuable panel space.

In a valve positioning application a potentiometer is sometimes used as a feedback signal. Quite often a wide open valve is only a 25% turn of the feedback potentiometer. The DRI-PT can easily be adjusted to provide a full scale output signal (e.g. 4 to 20 mA) representing 0 to 25% or even 50 to 75% of the potentiometer input.

The factory default configuration for the DRI-PT is as follows:

Input Range:
0 to 100%
Output: 4 to 20 mA

Specifications
POTENTIOMETER INPUT
End-to-End Resistance: 100 Ω up to 100 kΩ
Input Impedance: >1 MΩ
Input Excitation: 500 mV, 5 mA maximum drive
Zero Turn-Up: 80% of full scale input
Span Turn-Down: 80% of full scale input
Common Mode Rejection: 1800 Vdc (input to power)

OUTPUT
Voltage Output:

    Range: 0 to 5V, 0 to 10V (dip-switch selectable)
    Source Impedance: <10 Ω
    Drive: 10 mA max (1 kΩ min @ 10V)
Current Output:
    Range: 0 to 1 mA, 0 to 20 mA, 4 to 20 mA (dip-switch selectable)
    Source Impedance: >100 kΩ     
Compliance:

        0 to 1 mA: 7.5V max (7.5 kΩ max)
        0 to 20 mA: 12V max (600 Ω max)
        4 to 20 mA: 12V max (600 Ω max)
Accuracy (Including Linearity, Hysteresis): ±0.1% maximum at 25°C
Temperature Stability: <±0.05%/°C maximum of full scale range
Response Time (10 to 90%): <200 msec, typical
Common Mode Rejection: 120 dB @ DC, >100 dB @ 60 Hz
Isolation: 1800 Vdc between line power and input, output
LED Indication (Green): Active DC power
Humidity (Non-Condensing):
    Operating: 15 to 95% RH @ 45°C
    Soak: 90% RH for 24 hours @ 65°C
Temperature Range:
    Operating: 0 to 55°C
    Storage: -25 to 70°C
Power: 100 to 240 Vac, ±10%, 50 to 400 Hz; 1.5 W typical, 2.5 W max
Weight: 218 g
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
DRI-PT
436,47
Stock: 9 settimane
 
AC powered potentiometer input DIN rail signal conditioner
Accessories
ACPB-2
€47.06
Stock: 9 settimane
 
AC power distribution bus for 2 modules
ACPB-4
€105.71
Stock: 1 settimana
 
AC power distribution bus for 4 modules
ACPB-8
€144.26
Stock: 9 settimane
 
AC power distribution bus for 8 modules
Tutti gli importi indicati in EUR
Nota: An ACPB power rail is required to power the modules and is ordered separately.
We noticed you are from the US. Visit your local site for regional offers and live support.