Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

DIN Rail Mount Wireless Receivers with 4 Analogue Outputs

UWTC-REC4

Wireless Receivers with Analogue Outputs | UWTC-REC4

Wireless Receivers with Analogue Outputs

€673,35 UWTC-REC4-V1

INVIA ORDINE
1 anno di garanzia CE
  • Works with Up to 48 Wireless Transmitters
  • Four 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA Analogue Outputs
  • Interface Directly to PLCs, Chart Recorders and Data Loggers
  • Included Software Turns a PC Into a Multi-Channel Meter, Chart Recorder or Data Logger
Sensori wireless, trasmettitori, ricevitori , misuratori e controllori - Visualizza i prodotti correlati

Descrizione

Click if you want to know more about wireless sensors.

The UWTC-REC4 wireless DIN rail receiver can work with up to 48 wireless transmitters, displaying their data in real time on your PC. The UWTC-REC4 also has four independent analogue outputs, which can be user-programmed as a retransmission signal from any input channel, driving a PLC or data logger. The UWTC-REC4 is compatible with the full range of UW wireless transmitters from Omega; choose from thermocouple, RTD, %RH, infrared (non-contact) temperature, pH, as well as process voltage and current models.
The standard DIN rail mount design provides for easy mounting, and fast connections to other DIN rail equipment, including PLCs. The optional iDRN-PS-1000 power supply can power up to three UWTC-REC4 units, which can give you up to 144 wireless input channels, and 12 analogue outputs.

SPECIFICATIONS
Power: 12 to 24 Vdc @ 250 mA
Analogue Output: 4 independent, non-isolated, retransmission 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA
Alarms (Programmable): One per channel, rising/falling activation
Alarm Type: Open drain, 100 mA max Power, Output, Alarm Connection: Screw terminals
Operating Ambient: 0 to 55°C, 90% RH non-condensing Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz, direct sequence spread spectrum
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Enclosure: DIN rail (plastic)
Dimensions: 93 H x 39 W x 125 mm D
Interfaces Directly with PLCs and Multi-Channel Data Loggers to
Form a Complete Wireless Measurement and Control System!


Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con UWTC-REC4-MA
UWTC-REC4-MA
€649,26
Stock: 7 settimane
 
48 channel DIN rail mount receiver with four 4-20mA analogue outputs and alarms
  
UWTC-REC4-V1
€673,35
Stock: 7 settimane
 
48 channel DIN rail mount receiver with four 0-5Vdc analogue outputs and alarms
  
UWTC-REC4-V2
€673,35
Stock: 7 settimane
 
48 channel DIN rail mount receiver with four 0-10Vdc analogue outputs and alarms
  
UWTC-REC4-TC
Consultare l'Ufficio Commerciale  
Stock: 
 
 
48 channel DIN rail mount receiver with four type K thermocouple outputs and alarms
Accessories
  
LP-PS-1524
Consultare l'Ufficio Commerciale  
Stock: 
 
 
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
  
RAIL-35-1
€17.49
Stock: 1 settimana
 
35 mm DIN rail, 1 m length
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con RAIL-35-2
RAIL-35-2
€32.97
Stock: 1 settimana
 
35 mm DIN rail, 2 m length
† Tutti gli importi indicati in EUR
 Nota: The UWTC-REC4 can be powered directly by the PLC or data logger you are connecting to and will not require an additional power source if the instrument has 12 to 24 Vdc @ 250 mA available for external devices. If your instrument does not have a power source available for external devices you will need to add an additional power supply to power the wireless receiver (iDRN-PS-1000). This power supply can power up to 3 UWTC-REC4 receivers.
Comes complete with measurement/data logging software, USB programming cable, and operator's manual.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >