Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

High Performance Stepper Drives with Integrated Power Supply

STAC6 Series

High Performance Stepper Drives | STAC6 Series

High Performance Stepper Drives

€1.679,00 STAC6-Si

INVIA ORDINE
1 anno di garanzia CE
  • Current Output 0.5 to 6.0 A
  • 90 to 135 Vac Input
  • 220 Vac model available
  • Configurable Idle Current Reduction
  • Pulse and Direction
  • Analog Command Signal
  • Host Command via RS232/485
  • Fault Protection:
      – Over-Voltage, Under-Voltage
      – Over-Temp
      – External Output Shorts
      – Internal Amplifier Shorts
      – Motor Regeneration
  • Stand-Alone Programming on Si Model
  • Microstepping up to 51,200 Steps/Revolution
  • Sample Motion Programs Available by Request
Azionamenti e motori - Visualizza i prodotti correlati

Descrizione

The STAC6 represents the latest developments in stepper drive technology, incorporating advanced features that will derive the highest performance from today’s stepper motors. Its Anti-Resonance and Waveform Damping control algorithms make it a clear market leader. The "-S" models are step and direction drives, compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series. The "-Si" models are stand-alone programmable drives which are programmed with the simple-to-use Si Programmer software. Both the "-S" and "-Si" models can be controlled by sending serial commands in a simple ASCII format, the Si Command Language (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

All STAC6 drives feature a built-in power supply. Some of the advanced features of the STAC6 include:

Self Test and Auto Setup: At start-up the drive measures motor parameters, including the resistance and inductance, then uses this information to optimize the system performance. It also compares this information from the last configuration and checks to see if the motor data has changed (this could indicate a fault or system change). The drive can also detect open and short circuits.

Anti-resonance: A disadvantage of the step motor is a tendency to "resonate" at some frequency. By entering some system data this natural frequency can be calculated and a damping term entered into the control algorithm. This significantly improves midrange stability and allows higher speeds and more use of the available torque.

Command Signal Smoothing: Dynamic smoothing can soften the effect of immediate changes in velocity and direction, making the motion of the motor less jerky. An added advantage is that it can reduce the wear on mechanical components.

Torque Ripple Smoothing: All step motors have an inherent low speed torque ripple that can affect the motion of the motor. By analyzing this torque ripple the system can apply a negative harmonic to negate this effect, giving the motor much smoother motion at low speed.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

NOTE: Power cord not included. See Accessories below to order.
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
Recommended Motors
  
OMHT23-550
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 255 oz-in holding torque, shielded cable
  
OMHT34-488
€564.01
Stock: 5 settimane
 
NEMA 34, 650 oz-in holding torque, shielded cable
  
OMHT34-490
€842.36
Stock: 1 settimana
 
NEMA 34, 1845 oz-in holding torque, shielded cable
Terminal Connector Breakout Boards
  
OMBOB-1
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Terminal Connector Board for STAC6 In/Out1
  
OMBOB-2
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Terminal Conn. Board for STAC6-Si In/Out2
Accessories
  
MMI-01
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Operator interface (for use with -Si models)
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OM-CONV-USB
OM-CONV-USB
€23.30
Stock: 1 settimana
 
USB to RS232 Interface Converter; USB-A to DB9-male
  
OMG-USB-485-1
€174.02
Stock: 1 settimana
 
USB to RS-422/485/530 Interface Converter
  
OMG-CA175
€19.40
Stock: 7 settimane
 
DB25F/DB9M cable (DB9 RS-485 pinout)
  
Power Cord-SE
€12.18
Stock: 4 settimane
 
AC Power cord with stripped end termination
  
Power Cord-SE-M16
€17.27
Stock: 1 settimana
 
8' Power cord with M16 cable gland strain relief, 3x16 AWG, 250Vac max.
  
SI-PROG-CBL
€31.57
Stock: 1 settimana
 
Replacement programming cable (comes with drive)
  
DRIVE-CBL
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
  
DSUB-9-MF
Consultare l'Ufficio Commerciale  
Stock: 
 
 
DIN rail interface module, 9-pin
  
DSUB-25-MF
Consultare l'Ufficio Commerciale  
Stock: 
 
 
DIN rail interface module, 25-pin
  
DSUB-9-MF-CBL
€48.42
Stock: 1 settimana
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
  
DSUB-25-MF-CBL
€63.28
Stock: 1 settimana
 
DSUB cable, 25-pin, 2 m (6.6'), male/female connectors
† Tutti gli importi indicati in EUR
 Nota: Programming/configuration cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
 Esempio di Ordinazione: (1) OM-CONV-USB USB to RS-232 Interface Converter, €23.30  plus (1) OMHT23-550 NEMA 23 stepper motor, 255oz-in holding torque, €218.31  plus (1) STAC6-S High performance stepper drive with AC power supply, €1,344.00, €23.30 + 218.31 + 1,344.00 = €1,585.61

Manuali dei prodotti:

Download STAC6 Series - Stepper Drives
Download STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives

Programma:

Download Si Programmer software and manual
Download STAC6 Configurator (software)
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >