Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Operator Interface

MMI-01

Operator Interface | MMI-01

Operator Interface

Vedi tutti i modelli qui sotto

1 anno di garanzia
  • Ideal Operator Interface for Si Programmable Drives
  • Connects Directly to Si-Programmable Drives Using the Standard Programming Cable – No Special Wiring Required
  • Power is Supplied by the Drive – No Additional Power Supply Required
  • Easy to Program Using Si™ Programmer Software
  • 4-Line, 20 Characters/Line LCD Display
  • 20-Key Keypad
  • Can be Surface Mounted or Flush Mounted [NEMA 4/12 (IP56/52) Rating for Flush Mounting Only]
  • Sample Motion Programs Available by Request
Azionamenti e motori - Visualizza i prodotti correlati

Descrizione

The MMI-01 is an easy-to-use, flexible device that allows an operator to enter move speeds, move distances or repeat loop counts. Messages can also be displayed and the program can be paused until the user presses a key, such as ENTER, YES or NO. Program branching can be accomplished based on the response of YES or NO. The MMI-01 is compact, easy to install and carries a NEMA 4/12 (IP56/52) rating (the 4 x 20 character display and 20-key membrane keypad are sealed). Connection to any of our "Si" or "i" indexer drives is accomplished by the standard programming cable that is supplied with every drive. This cable also supplies power to the MMI-01 so that no additional power supply or wiring is needed. Set-up and programming of the MMI-01 is fast and easy. Our programmable "Si" or "i" drives are furnished with Si™ Programmer software, which allows the user to easily program instructions for the terminal. Complex, confusing items like baud rate, parity and cursor positioning are handled automatically by the software. On-screen emulation of the MMI-01 by the Si™ Programmer software allows a potential user to try the MMI before purchasing one.
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
MMI-01
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Operator interface
Tutti gli importi indicati in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.