Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521

Programmable Step Motor Indexer/Drive

1240i

Programmable Step Motor Indexer/Drive | 1240i

Programmable Step Motor Indexer/Drive

374,00 1240i

1 anno di garanzia CE
  • Provides Up to 1.2 A per Phase and Microstepping to 50,800 Steps Per Revolution
  • Accepts 12 to 42 Vdc Power Supply
  • Connects by a Simple Cable to Your PC for Programming (Cable Included)
  • Microsoft Windows™-Based Software for Easy Setup and Programming (Free Download)
  • 8 Inputs, 3 Outputs
  • Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Cycle Counts and More
  • Compatible With Multi-Axis Controller HUB 444
  • CE Compliant
  • Sample Motion Programs Available by Request
Azionamenti e motori - Visualizza i prodotti correlati

Descrizione

The 1240i is a stand-alone programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier. The 1240i includes easy to use software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to four drives (stepper or Servo) can be networked using a single SiNet™ Hub 444. The 1240i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
Quick Ship
1240i
374,00
Stock: 5 settimane
 
Programmable step motor indexer drive
Recommended Motors
Quick Ship
OMHT11-013
125.00
Stock: 7 settimane
 
NEMA 11 step motor, 15 oz-in holding torque
Quick Ship
OM5014-842
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 14 step motor, 26 oz-in holding torque
Quick Ship
OMHT17-075
85.00
Stock: 11 settimane
 
NEMA 17 step motor, 62.8 oz-in holding torque
Quick Ship
OMHT17-275
56.00
Stock: 1 settimana
 
NEMA 17 step motor, 62.3 oz-in holding torque
Quick Ship
OMHT17-278
67.00
Stock: 3 settimane
 
NEMA 17 step motor, 113 oz-in holding torque, 1.0 A/phase (series connection)
Quick Ship
OMHT23-393
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23 step motor, 76.6 oz-in holding torque
Quick Ship
OMHT23-593
67.00
Stock: 5 settimane
 
NEMA 23 step motor, 79.3 oz-in holding torque
Accessories
Quick Ship
MMI-01
€595.00
Stock: 3 settimane
 
Operator Interface
Quick Ship
HUB 444 DIN RAIL
€380.00
Stock: 5 settimane
 
Multi-axis network hub with DIN rail mounting kit
Quick Ship
OM-CONV-USB
€18.25
Stock: In magazzino
 
USB to RS232 Interface Converter; USB-A to DB9-male
Quick Ship
OM-PL-USBS
€48.00
Stock: In magazzino
 
USB to RS232 converter; works with Windows Vista and Windows 7.
Quick Ship
OMPS150A24
€114.00
Stock: 5 settimane
 
Stepper drive power supply, 24 VDC, 6.3A
Quick Ship
Power Cord-SE
€6.90
Stock: 1 settimana
 
AC Power cord with stripped end termination
Quick Ship
SI-PROG-CBL
€20.50
Stock: 1 settimana
 
Replacement programming cable (comes with drive)
Quick Ship
DRIVE-CBL
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
Quick Ship
DSUB-9-MF
€58.00
Stock: 7 settimane
 
DIN rail interface module, 9-pin
Quick Ship
DSUB-9-MF-CBL
€27.00
Stock: 7 settimane
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
Tutti gli importi indicati in EUR
Nota: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Esempio di Ordinazione: (1) 1240I Programmable step motor drive, €374.00  plus (1) OMHT17-075 NEMA 17 step motor, 62.8 oz-in holding torque, €85.00  plus (1) OMPS150A24 Stepper drive power supply, 24 VDC, 6.3A, €114.00, €374.00 + 85.00 + 114.00 = €573.00

Manuali dei prodotti:

Download 1240i Series - Programmable Step Motor Driver
Download STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives