Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Microstepping Motor Drives

3540M

Microstepping Motor Drives | 3540M

Microstepping Motor Drives

Vedi tutti i modelli qui sotto

INVIA ORDINE
  • DC Bus Voltage 12 to 42 Vdc Motor Supply (Including Ripple)
  • Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
  • Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
  • Enable Input to Turn Off Current to the Motor
  • Screw Terminal Connectors
  • MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
  • 3 State, Pulse Width Modulated Current Control, Switching at 20 to 30 KHz
Azionamenti e motori - Visualizza i prodotti correlati

Descrizione

Click on this link if you need more information about Stepper motor.

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, step phase sequencer with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
  
3540M
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Microstepping step motor drive, 3.5 A/phase, 40 VDC
  
3540MO
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Microstepping step motor drive with digital oscillator
Recommended Motors
  
OMHT17-075
€114.28
Stock: 11 settimane
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT23-397
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 264 oz-in holding torque
Accessories
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OMPS150A24
OMPS150A24
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
† Tutti gli importi indicati in EUR
 Nota: To see torque-speed curves for recommended motors, click on "Specs" above.

Manuali dei prodotti:

Download 3540M - Step Motor Driver
Download 3540MO Series - Step Motor Driver
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >