Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Programmable Step Motor Indexer/Drive

3540i

Programmable Step Motor Indexer/Drive | 3540i

Programmable Step Motor Indexer/Drive

661,49 3540i

CE
  • Powerful, Precise and Efficient MOSFET Driver Providing Up to 3.5 A per Phase and Microstepping to 50,800 Steps per Revolution
  • Accepts 12 to 42 Vdc Power Supply
  • Powerful, Flexible, Easy-to-Use Indexer
  • Connects by a Simple Cable to Your PC for Programming (Cable Included)
  • Microsoft Windows™-Based Software for Easy Set up and Programming
  • Eight Inputs for Interacting with the User and Other Equipment
  • Three Outputs for Coordinating External Equipment
  • All I/O is Optically Isolated, 5 to 24V, Sinking or Sourcing Signals. (Except PC/MMI Port which is ±12V RS232)
  • Sturdy 38.1 x 76.2 x 127 mm (1.5 x 3 x 5") Metal Chassis
  • Screw Terminal Connectors for Motor, DC Power and I/O Signals
  • Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Loop Counts and More
  • Optional encoder + RS485 daughterboard
  • Sample Motion Programs Available by Request
Azionamenti e motori - Visualizza i prodotti correlati

Descrizione

Find how a Stepper motor works on this link.

The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™. For multi-axis applications, up to 4 Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. A daughterboard is available which provides an encoder input as well as an RS485 interface.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Power Supply (Required for Drive Operation): Recommended: OMPS150A24

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

Click here to download Si Programmer for free:
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
  
3540i
661,49
Stock: 1 settimana
 
Programmable step motor index drive
Recommended Motors
  
OMHT17-075
114.28
Stock: 11 settimane
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT23-397
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 264 oz-in holding torque
Double Shaft Motors (required for encoder mounting)
  
OMHT17-075-D
123.08
Stock: 17 settimane
 
NEMA 17, 62.8 oz-in holding torque, double shaft
  
OMHT23-397-D
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 177 oz-in holding torque, double shaft
  
OMHT23-400-D
Consultare l'Ufficio Commerciale  
Stock: 
 
 
NEMA 23, 264 oz-in holding torque, double shaft
Accessories
  
ENC-1000-175
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Accessory daughterboard for Encoder inputs + RS485 comm
  
ENC-1000i
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Differential encoder for NEMA 11/14/17 motors, 1000-line, with index pulse
  
ENC-1000i-23
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Differential encoder for NEMA 23 motors, 1000-line, with index pulse
  
ENC-CA-4217-6FT
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Encoder cable, 2 m (6')
  
ENC-CA-4217-10FT
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Encoder cable, 3 m (10')
  
ENC-CA-4217-20FT
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Encoder cable, 6 m (20')
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OM-CONV-USB
OM-CONV-USB
€23.30
Stock: 1 settimana
 
USB to RS-232 Interface Converter
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OMPS150A24
OMPS150A24
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
  
SI-PROG-CBL
€31.57
Stock: 1 settimana
 
Replacement programming cable (comes with drive)
  
DRIVE-CBL
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
Tutti gli importi indicati in EUR
Nota: Software and programming cable included. To see torque-speed curves for recommended motors, click on "Specs" above.
We noticed you are from the US. Visit your local site for regional offers and live support.