Discontinued - Compact 1/32 DIN Process Indicator. DC Powered

DPM35A

compact process panel meter

^€253,06 DPM35A

INVIA ORDINE

3 1/2-Digit Display
1/32DIN, 10-30 VDC powered, with LED display
User-Selectable Inputs
Minimal Panel Depth
0.2% Accuracy
Scalable to Engineering Units, with Selectable Decimal Point

Misuratori di temperatura e di processo , temporizzatori e contatori - Visualizza i prodotti correlati

Descrizione

This product has been discontinued

The DPM35A is a compact process indicator, requiring only 70 mm of depth behind a panel. This instrument uses a 45 x 22 mm panel cutout (1/32 DIN), with large, 10 mm display digits. Inputs are connected via a rear screw terminal connector.

Process voltage or mA signal input ranges are set by the user. In addition, the unit can be scaled to display in engineering units, for both zero and span. The decimal point position is also jumper selected.

SPECIFICATIONS
Display: 7 segments, red LED, 3 ½ digit
Polarity: automatic, only minus (-)
Digit Height: 10 mm
Input Type: bipolar, single
Ranges:

Signal Input	Input Impedance
0/4 to 20 mA	182 Ω
0/10 to 50 mA	168 Ω
0 to 2/10 V dc	200 kΩ
0 to 10/200 V dc	1 MΩ

Converter: dual-slope, average value
Read Rate: 2.5/sec
Warm-up to Rated Accuracy: 2 min.
Accuracy: at 25 °C ± 0.2 % ± 1 count
Span Tempco: <50 ppm
Zero Tempco: 2 µV/ ºC
Over-range Positive: display blanking
Over-range Negative: only "-1" displayed
Decimal Point: 000.0 standard (selectable by solder jumpers)
Operating Temperature: -20 to +60 ºC
Storage Temperature: -40 to 80 ºC
Power: 10 to 30 V dc

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

DPM35A

€253,06

Stock: In magazzino

1/32 DIN 3 ½ digit process meter

† Tutti gli importi indicati in EUR
Nota: Comes with complete operator’s manual.