Miniature and Standard Protection Tubes

SS-() and INC-() Series

^€10,84 SS-116-6OPEN

INVIA ORDINE

Available in 316 Stainless Steel or Inconel 600
6 Inch Length Standard, Other Lengths are Available
Available With Open or Closed Ends

Termocoppie - Visualizza i prodotti correlati

Descrizione

OMEGA™ Miniature and Standard Protection Tubes are available in 316 stainless steel and Inconel 600 nickel alloy. Tubes are available either open at both ends or with one end closed. Standard length available from stock is 6 inches; however, practically any length tube is available on short delivery.

OMEGA’s protection tubes are intended for use with OMEGA’s fine or heavy gage thermocouples and ceramic insulators, as well as OMEGA’s standard thermocouples made from OMEGACLAD™ thermocouple wire. These items are shown in Section A of this catalog. Bare wire thermocouples can be insulated using OMEGATITE™ ceramic insulators as well as the insulators used in replacement elements.

OMEGA’s protection tubes can be conveniently secured into pipes, vessels, and chambers by using OMEGALOK™ compression fittings.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

SS-116-6OPEN

€10,84

Stock: 4 settimane

Stainless steel tube, 1/16 inch O.D., 6 inch length, open ended

SS-116-6CLOSED

€15,77

Stock: 1 settimana

Stainless steel tube, 1/16 inch O.D., 6 inch length, closed ended

SS-14-6OPEN

€11,66

Stock: 1 settimana

Stainless steel tube, 1/4 inch O.D., 6 inch length,open ended

SS-14-6CLOSED

€15,21

Stock: 1 settimana

Stainless steel tube, 1/4 inch O.D., 6 inch length, closed ended

† Tutti gli importi indicati in EUR

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

(1)		(2)		(3)
	-		-6

Descrizione delle opzioni:

(1) Tube Material All tubes above are 6 inches long Seleziona da:
SS per 316 Stainless Steel
INC per Inconel 600

(2) Tube O.D. Seleziona da:
116 per 1/16 inch
18 per 1/8 inch
316 per 3/16 inch
14 per 1/4 inch
516 per 5/16 inch
38 per 3/8 inch
716 per 7/16 inch
12 per 1/2 inch

(3) End Configuration Seleziona da:
CLOSED per Closed End
OPEN per Open End

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.

Miniature and Standard Protection Tubes

SS-(*) and INC-(*) Series

SS-() and INC-() Series