Flanged Thermowells for 1/4 and 3/8 Inch Diameter Elements

SERIES 260F and 385F

Vedi tutti i modelli qui sotto

INVIA ORDINE

Rugged Industrial Thermowell with Flange
Available in Carbon Steel and Stainless Steel
Standard lengths from 2 to 22 inches
Bore Diameters of 0.260 and 0.385 Inches

Pozzetti e teste e assemblati - Visualizza i prodotti correlati

Descrizione

Application:
260F series fits standard length 1/4" diameter elements.
385F series fits standard length 3/8" diameter elements.
Flange Sizes:
1" and 11/2" flanges in all facings and pressure ratings are standard. Other sizes are available on application.
Materials:
Flanges and wells made of Carbon Steel (C-1018), A.I.S.I. 304, A.I.S.I. 316, and Monel are available for quick delivery. Other materials are available.

Protective Coatings for Thermowells:
• Resist Corrosion
• For Chemical Baths
• Color-Coded Sensors for Process Control
• Available in PFA, Epoxy and other materials.
Consult Sales Department for complete information
Welding:
Primary weld is “J” groove type; secondary weld is 45° bevel groove. Welding is performed by Navy certified welders using inert gas shielded arc.
Cap and Chain Options:
Consult sales.

Thermowell Dimensions
Model Number	Element Length A	Insertion Length U	Shank Diameter Q	Bore Diameter B
260F-U 2() U 4() U 7() U10() U13() U16() U22(*)	4 6 9 12 15 18 24	2 4 7 10 13 16 22	3/4 3/4 3/4 3/4 3/4 3/4 3/4	.260 .260 .260 .260 .260 .260 .260
385F-U 2() U 4() U 7() U10() U13() U16() U22(*)	4 6 9 12 15 18 24	2 4 7 10 13 16 22	7/8 7/8 7/8 7/8 7/8 7/8 7/8	.385 .385 .385 .385 .385 .385 .385

Flanges
Rating lb/in²	Size inch	Model Number (Flange Suffix)
150	1 1-1/2 2	1-150RF (or FF)() 11/2-150RF (or FF)() 2-150RF (or FF)(*)
300	1 1-1/2 2	1-300RF (or FF)() 11/2-300RF (or FF)() 2-300RF (or FF)(*)

*Insert code for material -304SS for 304 stainless steel,-316SS for 316 stainless steel, -CS for carbon steel
The thermowell and flange must
be made of the same material.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

Examples of common part numbers are shown below. Please use the Part Number builder beneath this table to select your exact configuration.

260F-U4-304SS-1-150FF-304SS

€256.40

Stock: 9 settimane

304SS flanged thermowell with 0.260 in. bore diameter, 4 in. insertion length, 1.5 inch flat faced 150 lb flange

260F-U10-304SS-11/2-150FF-304S

€366.27

Stock: 9 settimane

304SS flanged thermowell with 0.260 in. bore diameter, 10 in. insertion length, 1.5 inch flat faced 150 lb flange

385F-U13-CS-2-150RF-CS

Consultare l'Ufficio Commerciale

Stock:

Carbon steel flanged thermowell with 0.385 in. bore diameter, 13 in. insertion length ,2 inch raised faced 150 lb flange

385F-U16-316SS-1-150FF-316SS

Consultare l'Ufficio Commerciale

Stock:

316SS flanged thermowell with 0.385 in. bore diameter, 16 in. insertion length 1 inch flat faced 150 lb flange

† Tutti gli importi indicati in EUR
Nota: Consult factory for recommendations as to pressure and temperature ratings for flanged thermowells.

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

(1)		(2)		(3)		(4)		(5)	(6)		(7)
	F-U		-		-		-			-

Descrizione delle opzioni:

(1) Bore Diameter Seleziona da:
260 per 0.260 inch bore diameter
385 per 0.385 inch bore diameter

(2) Insertion Length Seleziona da:
2 per 2 inches
4 per 4 inches
7 per 7 inches
10 per 10 inches
13 per 13 inches
16 per 16 inches
22 per 22 inches

(3) Well Material(must be same as flange material) Seleziona da:
304SS per 304 stainless steel
316SS per 316 stainless steel
CS per carbon steel

(4) Flange Size Seleziona da:
1 per 1 inch
11/2 per 1.5 inches
2 per 2 inches

(5) Flange Rating Seleziona da:
150 per 150 PSI
300 per 300 PSI

(6) Flange Face Seleziona da:
RF per raised face
FF per flat face

(7) Flange Material(must be same as well material) Seleziona da:
304SS per 304 stainless steel
316SS per 316 stainless steel
CS per carbon steel

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.