Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Quick Disconnect Handle/Thermocouple Probe Sets with High Impact ABS or Rugged Aluminum Handles

SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets | SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets

50,00 SDX-SET-GP-J-SMP

  • Handles Supplied with 0.3m (1') Retractable Cable – Expands to 1.5m (5')!
  • In Stock with Subminiature Connector on Cable for Use with Handheld Thermometers
  • Free Mating Connector Included
  • SDX-UST Plastic Handle Accepts Both Standard and Miniature Probes/Connectors
Termocoppie - Visualizza i prodotti correlati

Descrizione



General Purpose Probe:
General purpose immersion probe, 300mm 12" long, grounded junction, 1/8" O.D., 304 SS sheath. Rated to 900°C (1650°F).

Penetration Probe:
Conical tip for insertion into soft and semi-frozen material. 300mm (12") long, grounded junction, 4.5 mm (3/16") O.D. 304 SS. Tip rated to 900°C (1650°F).

Air Probe:
Exposed thermocouple element protected by 3/16" O.D. 304 SS sheath. Drilled end exposes bead to airflow for fast measurements. Constant diameter for easy insertion or mounting into duct work. 300mm (12") long. Rated to 870°C (1600°F).

Fast Response Probe:
Special reduced diameter (1/16") tip designed for fast response. Rugged 3 mm (1/8") O.D., grounded junction, 304 SS sheath. Tip rated to 900°C (1650°F).

Flexible Tip Surface Probe:
Flexible tip conforms to most surfaces for fast, repeatable, accurate measurements. Made from RTV silicone rubber for good thermal contact. 6mm (1/4") O.D. 304 SS sheath. 5/16 OD, overall. Tip rated to 260°C (500°F). Note: subjecting sensor tip to temperatures above 315°C (600°F) will result in tip damage.

Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Quick Ship
SDX-SET-GP-E-SMP
50.00
Stock: 9 settimane
 
Handle/Probe Set, SDX High Impact Plastic Handle, General Purpose Probe, E Calibration
Quick Ship
SDX-SET-AP-J-SMP
110.00
Stock: 9 settimane
 
Handle/Probe Set, SDX High Impact Plastic Handle, Air Probe, J Calibration
Quick Ship
SDX-SET-NP-E-SMP
64.00
Stock: 9 settimane
 
Handle/Probe Set, SDX High Impact Plastic Handle, Penetration Probe, E Calibration
Quick Ship
HDX-SET-GP-K-SMP
55.00
Stock: 9 settimane
 
Handle/Probe Set, HDX Rugged Aluminum Handle, General Purpose Probe, K Calibration
Quick Ship
HDX-SET-NP-T-SMP
69.00
Stock: 9 settimane
 
Handle/Probe Set, HDX Rugged Aluminum Handle, Penetration Probe, T Calibration
Tutti gli importi indicati in EUR

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto
Descrizione delle opzioni:


(1) Seleziona da:
SDX per SDX High Impact Plastic
HDX per HDX Rugged Aluminum

(2) Seleziona da:
GP per General Purpose Probe
NP per Penetration Probe
AP per Air Probe
RT per Fast Response Probe
FSP per Flexible Tip Surface Probe

(3) Seleziona da:
J per J Type Thermocouple
K per K Type Thermocouple
E per E Type Thermocouple
T per T Type Thermocouple
Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.
We noticed you are from the US. Visit your local site for regional offers and live support.