Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Preamplified Alpha® Electrodes

PHE-6300, PHE-5300, PHE-2114 and PHE-1304

Preamplified Alpha® Electrodes | PHE-6300, PHE-5300, PHE-2114 and PHE-1304

Preamplified Alpha® Electrodes

132,11 PHE-1304-EB

  • Interfaces Directly with Most Instrumentation that Accepts mV Input Signal
  • Signal can be Run Up to 305 m (1000')
  • Power Supply Available in Three Styles
Elettrodi per pH sul campo e da laboratorio - Visualizza i prodotti correlati

Descrizione

Find how a pH Meter works on this link.

OMEGA Engineering offers pH electrodes with integral preamplifiers for laboratory or industrial applications. These electrodes can interface directly with equipment that accepts a millivolt input signal with a 10 k½ or greater input impedance, such as a data acquisition interface or multimeter. The preamplifier converts the high impedance millivolt signal of the electrode into a low impedance signal, enabling the signal to be run up to 305 m (1000') without signal loss. The electrode is supplied with 1 to 3 m (3 to 10') of coaxial cable, depending on the model. If longer cable lengths are required, simply splice on extension cable.

These preamplified electrodes are available in a variety of styles and can interface with any pH meter, controller, transmitter, multimeter or data acquisition system with a one-to-one unity gain.

An accompanying power supply is available in three styles: an encapsulated battery design, an external battery style, and a style for use with an external dc power source.

Model No. Description
PHE-1304-(*)Combination gel-filled, epoxy-bodied, general purpose laboratory
pH electrode. pH range 0 to 12, temp. 0 to 80°C (32 to 176°F).
PHE-2114-(*)Combination general purpose, large bulb, refillable glass pH
electrode. pH range 0 to 13, temp. 0 to 1000°C (32 to 1832).
PHE-5311-10-(*)Industrial in-line combination, general purpose, gel filled, pH
electrode, Kynar housing, 1/2" MNPT threading, insertion length 1".
10' of cable standard. pH range 0 to 13, temp. range
-5 to 100°C. (23 to 212°F). Dimensions: 127 x 25 mm (5 x 1").
PHE-5411-10-(*)Industrial in-line combination double junction electrode. MNPT
threading, insertion length 1". 10' of cable standard. pH range 0 to
13, temp. range -5 to 100°C (23 to 212°F).
Dimensions: 127 x 25 mm (5 x 1").
PHE-5316-10-(*)Industrial in-line combination, general purpose, gel-filled, pH
electrode, CPCV housing, 3/4" MNPT threading, 2" insertion length.
10' cable standard. pH range 0 to 13, temp. range
-5 to 80°C (23 to 176°F). Dimensions: 168 x 25 mm (6.6 x 1").
PHE-6351-10-(*)Industrial submersible, combination, general purpose,
gel-filled, pH electrode. Electrode potted in 36" ABS pipe.
10' cable standard. pH range 0 to 13, temp. range 0 to 80°C
(32 to 176°F). Dimensions: 28 x 914 mm (1.1 x 36").
PHE-6451-10-(*)Industrial submersible, combination, double junction,
gel-filled, pH electrode. Electrode potted in 36" ABS pipe.
10' cable standard. pH range 0 to 13, temp. range
0 to 80°C (32 to 176°F). Dimensions: 28 x 914 mm (1.1 x 36").
* Specify power option (see table) and add additional cost to price of electrode:
“-EB” ($60), “-PB” ($60), or “-NB” ($50).
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con PHE-1304
PHE-1304
55.01
Stock: 1 settimana
 
Combination gel-filled, epoxy-bodied, general purpose laboratory pH electrode. pH range 0 to 12 temp. 0 to 80°C (32 to 176°F)
  
PHE-1304-EB
132.11
Stock: 6 settimane
 
Pre-amp electrode with replaceable external battery pack
  
PHE-1304-NB
116.68
Stock: 6 settimane
 
Pre-amp electrode, requires external DC power supply
  
PHE-1304-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-2114
119.15
Stock: 6 settimane
 
Combination, general purpose, large bulb, refillable glass pH electrode. pH range 0 to 13, temp. 0 to 1000°C (32 to 1832°F)
  
PHE-2114-EB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with replaceable external battery pack
  
PHE-2114-NB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode, requires external DC power supply
  
PHE-2114-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-5311-10
161.19
Stock: 6 settimane
 
Industrial in-line combination, general purpose, gel-filled, pH electrode, PVDF housing, 1/2 MNPT threading, insertion length 1". pH range 0 to 13, temperature range -5 to 100°C (23 to 212°F)
  
PHE-5311-10-EB
243.05
Stock: 6 settimane
 
Pre-amp electrode with replaceable external battery pack
  
PHE-5311-10-NB
207.95
Stock: 6 settimane
 
Pre-amp electrode, requires external DC power supply
  
PHE-5311-10-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-5411-10
195.20
Stock: 6 settimane
 
Industrial in-line combination double junction electrode, MNPT threading, insertion length 1". pH range 0 to 13, temperature range -5 to 100°C (23 - 212°F)
  
PHE-5411-10-EB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with replaceable external battery pack
  
PHE-5411-10-NB
258.15
Stock: 6 settimane
 
Pre-amp electrode, requires external DC power supply
  
PHE-5411-10-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-5316-10
144.83
Stock: 1 settimana
 
Industrial in-line combination, general purpose, gel-filled pH electrode, CPCV housing, 3/4 MNPT threading, 2" insertionlength. pH range 0 to 13, temperature range -5 to 80°C (23 to 176°F)
  
PHE-5316-10-EB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with replaceable external battery pack
  
PHE-5316-10-NB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode, requires external DC power supply
  
PHE-5316-10-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-6351-10
180.58
Stock: 6 settimane
 
Industrial subersible, combination, general purpose gel-filled, pH electrode. pH range 0 to 13, temperature range 0 to 80°C (32 to 176°F)
  
PHE-6351-10-EB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with replaceable external battery pack
  
PHE-6351-10-NB
245.40
Stock: 6 settimane
 
Pre-amp electrode, requires external DC power supply
  
PHE-6351-10-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
  
PHE-6451-10
211.09
Stock: 6 settimane
 
Industrial submersible, combination, double junction, gel-filled, pH electrode. pH range 0 to 13, temperature range 0 to 80°C (32 to 176°F)
  
PHE-6451-10-EB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with replaceable external battery pack
  
PHE-6451-10-NB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode, requires external DC power supply
  
PHE-6451-10-PB
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Pre-amp electrode with battery encapsulated in the cap. Battery can not be replaced.
Accessories
  
EB-SPARE
29.00
Stock: 7 settimane
 
Spare battery pack for -EB option.
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con PHE-DPS
PHE-DPS
75.96
Stock: 6 settimane
 
±3 Vdc power supply to operate preamplified electrodes, input 115 Vac
Tutti gli importi indicati in EUR
Nota: Specify power option and add additional cost to price of electrode: "-EB" ($60), "-PB" ($60), or "-NB" ($50).

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto
Descrizione delle opzioni:


(1) Code in Part Number Seleziona da:
1304 per code 1304
2114 per code 2114
5311-10 per code 5311-10
5316-10 per code 5316-10
6351-10 per code 6351-10
6451-10 per code 6451-10

(2) Code in Part Number Seleziona da:
Niente (lasciare il campo vuoto)
-EB per Replaceable external battery pack
-PB per Battery encapsulated in the cap of the electrode. Battery life approximately one year. Battery cannot be replaced
-NB per Requires external dc power supply of ±1.5 Vdc to ±9 Vdc
Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.
We noticed you are from the US. Visit your local site for regional offers and live support.