Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
OMEGA™ high accuracy integral
signal conditioners are designed for
direct mounting onto OMEGA
FTB-100 and 200 Series turbine
meters. The input circuitry of the
signal conditioners has been
designed to receive and condition
low level turbine meter signals while
rejecting unwanted noise and
spurious signals. A signal threshold
control is provided which allows the
user to set the input sensitivity
above the ambient noise level,
thereby eliminating any false
signal on the output. Signal
conditioners are available that can
provide 4 to 20 mA, 0 to 5V, and
scaled frequency pulse outputs
that run on unregulated power
supplies.
A zero and a span potentiometer
allow for simple field adjustment
of the analogue outputs from the
signal conditioners.
Specifications Temperature Range: 0 to 70°C Pulse Output: TTL/CMOS; open collector for FLSC-51B Input Frequency: 10-1000 Hz, 28 mV P-P; 1000-2500 Hz, 70 mV P-P. Can be used with any OMEGA Turbine Meter Maximum Input: 120V RMS Electrical Connections: Screw terminals Maximum Lead Length: 300 metres of 24 gauge copper wire for pulse or mA; 30 m for 0 to 5V output. Weight: 2.3 kg
Ordina per Codice Prodotto
† Tutti gli importi indicati in EUR Nota: Signal conditioners are installed at no charge when purchased with turbine meter. Ordering example with turbine meter :SYS/FTB-101/FLSC-18B Add cost of turbine and signal conditioner together for system cost. NOTE: The use of explosion-proof heads does not imply that complete assembly is either explosion-proof or intrinsically safe. It is the user’s responsibility to determine the suitability of materials for a given installation.