Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Turbine Flow Meter

FTB720 FTB730 FTB740 FTB760 FTB720-S FTB730-S FTB740-S FTB760-S

Turbine Flow Meter | FTB720 FTB730 FTB740 FTB760 FTB720-S FTB730-S FTB740-S FTB760-S

Turbine Flow Meter

Vedi tutti i modelli qui sotto

1 anno di garanzia
  • Turbine flow meter with standard PVC or Carbon Steel Flanged Bodies
  • Choice of PVC or Carbon Steel Body
  • High-Accuracy Machined Turbine Internals Removable with Meter in Line
Flussimetri a turbina e a palette - Visualizza i prodotti correlati

Descrizione

Click on this link if you need more information about a Flow meter.

OMEGA™ FTB700 Series turbine flow meter has an unique system precisely-machined helical rotors and high-quality jewel bearings. The rotor is the only moving part. Small magnets on the rotor hub are electronically detected by a solid-state Hall-effect sensor outside the wetted area. The turbine rotor uses journaltype sapphire and ruby bearings for minimum friction and maximum life. These bearings are ideal for long life in water and water-based fluids, and give exceptional low-flow characteristics. The entire rotor assembly (rotor, hubs, bearings, rotor strut) can be removed from the meter as a single unit without removing the meter from the pipe.

SPECIFICATIONS
Maximum Working Pressure: 150 psi PVC, 200 psi carbon steel
Maximum Temperature:
    Carbon Steel: 93°C (200°F)
    PVC: 49°C (120°F)
Accuracy: ±1% FS
Signal: Squarewave pulse
Power: 6 to 24 VdcB

Materials
    Meter Body: PVC or carbon steel
    Flanges: Van Stone w/steel backing flange for PVC bodies, 150# ANSI for carbon steel bodies
    Turbine Rotor: PVDF
    Rotor Shafts: Zirconia ceramic
    Bearings: Sapphire journal, ruby ball

FTB700-D (Optional Display)
Power: 11 to 24 Vdc, 20 mA max
Rate: 8-digit autorange
Total: 8-digit, selectable decimal
Memory: Non-volatile (no battery needed)
Pulse Output: 0.1 sec, open collector Analogue Option 4 to 20 mA, user-programmable

FTB700-T (Optional Blind Transmitter)
Output:
4 to 20 mA
Loop Power: 12 to 26 Vdc (isolated)
Accuracy: ±1%
Response Time: 3 sec, 95% FS
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
  
FTB730
1,988.44
Stock: 1 settimana
 
3" PVC, 14-1800 lpm, 2.2 pulses/litre
  
FTB740
2,363.69
Stock: 1 settimana
 
4" PVC, 28-2725 lpm, 1.1 pulses/litre
  
FTB760
3,018.54
Stock: 5 settimane
 
6" PVC, 55-5455 lpm, 0.44 pulses/litre
Accessories
  
FTB700-T
494.25
Stock: 1 settimana
 
Blind 4 to 20 mA transmitter
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con LP-PS-1524
LP-PS-1524
Consultare l'Ufficio Commerciale  
Stock: 
 
 
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
Compatible meters
  
DPF20-HV-R1-R1
327.30
Stock: 8 settimane
 
6 digit, 1/8 DIN panel meter for Rate or Total, 85 to 260 Vac powered, with dual relay outputs
Tutti gli importi indicati in EUR
Nota: Comes complete with operator’s manual.
 
We noticed you are from the US. Visit your local site for regional offers and live support.