Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Parallel Pneumatic Grippers - Low Profile

RPL Series Parallel Gripper

RPL SERIES Parallel Pneumatic Grippers - Low Profile | RPL Series Parallel Gripper

RPL SERIES Parallel Pneumatic Grippers - Low Profile

€468,81 RPL-1M

INVIA ORDINE
  • Precision Gripping-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
  • Gripper Force 116 to 160 N Stroke 6.4 to 19.1 mm
  • Accuracy of 0.05 mm and Repeatability of 0.03 mm
  • Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
  • Non-Synchronous Motion Option Provides Independent Jaw Operation
  • Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
  • Operating Temperature -35 to 80°C
  • System Requires 0.3 to 7 bar Dry Filtered (40 Micron or Better) Air Supply
  • Requires 4 Way, 2 Position Valve and Regulator for Delicate Parts
Mozione - Visualizza i prodotti correlati

Descrizione

More information about how a pneumatic gripper works in this link.

RPL Series Gripper is a pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. This gripper supports longer finger length designs compared to other grippers of similar sizes. These grippers are available in stroke lengths from 6.4 to 19.1mm with a grip force from 116 to 160 N.

Linear motion pneumatic components are double acting cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.

Specifications
Pneumatic Specifications
    Pressure Operating Range: 0.3 to 7 bar
    Cylinder Type: Dual double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C
    FKMSeals (Optional): -30 to 120°C
Maintenance Specifications
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
Descrizione
  
RPL-1M
€468,81
Stock: 13 settimane
 
Parallel Gripper with a stroke length of 6.4mm (.025") and a grip force of 116 N (26 lb)
  
RPL-2M
€667,83
Stock: 13 settimane
 
Parallel Gripper with a stroke length of 12.7mm (0.50") and a grip force of 116 N (26 lb)
  
RPL-3M
€917,44
Stock: 1 settimana
 
Parallel Gripper with a stroke length of 19.1mm (0.75") and a grip force of 160 N (36 lb)
Accessories
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OSMK-008
OSMK-008
€44.35
Stock: 10 settimane
 
Sensor mounting kit, 1 required
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OHSN-017
OHSN-017
€153.64
Stock: 1 settimana
 
NPN magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con OHSP-017
OHSP-017
€217.36
Stock: 1 settimana
 
PNP magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con CABL-010
CABL-010
€52.69
Stock: 1 settimana
 
2 m (6') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
CABL-013
€91.13
Stock: 13 settimane
 
5 m (16') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
OFSV-004
€113.35
Stock: 13 settimane
 
M5 fail safe valve, 1 required
† Tutti gli importi indicati in EUR
 Nota: All models come with standard synchronous jaws, if non-synchronous jaws are required consult sales.
All sensors and cables sold sepatately.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >