Industrial HF-Resistant Alpha pH Electrode - Discontinued

PHE-901-HF - DISCONTINUED

Vedi tutti i modelli qui sotto

INVIA ORDINE

In-line or Submersion Mount

HF Resistant

10 Feet of Cable

Tabella degli ordini

Descrizione

Specs

Prodotti
Correlati

Stampare
questa pagina

Top

Descrizione
The PHE-901-HF model has been discontinued. Please see the -HF option in the PHE-7300 Series as a possible alternative or contact our Flow Engineering Department.

This rugged pH electrode is specially designed for pH determination in samples containing hydrofluoric acid or other acid fluorides. Such samples can cause rapid deterioration of a typical glass pH electrode. This electrode consists of a PVC housing, incorporating a non-glass reference element and a plastic membrane pH sensor. Corrosive acid fluoride solutions will not reduce electrode performance or lifetime. The electrode has a zero potential at 7 pH and can be effectively used on most pH analyzers and controllers. Manual temperature compensation is recommended where required. The electrode is threaded with a 1" MNPT on both ends. The electrode can be installed into a pipe tee for in-line use, or on the end of a 1" FNPT submersion pipe.

Specifications
pH Range: 1 to 8
Temperature: 0 to 50°C
Zero Potential: 7 pH
Maximum Pressure: 50 psi
Body Construction: PVC

Dimensions
Overall Length: 160 mm (6.3")
Fitting Length: 137.2 mm (5.4")
Diameter: 33.04 mm (1.30")
Cable Length: 3 m (10')

† Tutti gli importi indicati in EUR
Nota: PHCN-37 controllers are not compatible with this electrode

Prodotti Correlati:

PHA-4, PHA-7 and PHA-10
ACQUISTARE ORA →
Pre-mixed pH Calibration Solutions