Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

PACE Modular Pressure Controller - Discontinued - No Longer Available

PACE5000/6000

Druck PACE 5000 & 6000 Pressure Controllers | PACE5000/6000

Druck PACE 5000 & 6000 Pressure Controllers

Vedi tutti i modelli qui sotto

INVIA ORDINE
1 anno di garanzia
  • Selection of Chassis and interchangeable control modules
  • Single, dual or auto range control module confi gurations
  • High speed pressure control
  • Up to 210 bar (3000 psi/21 MPa) gauge and absolute
  • Precision to 0.001% FS over calibrated temperature range
  • Accuracy 0.0016% Rdg (+0.0033% FS)
  • Long-term stability to 0.0025% FS per annum
  • Barometric reference option
  • Utilizes GE’s new unique range of piezo-resistive and TERPS pressure sensor technology
  • 28 selectable pressure units and 4 user defi ned units
  • Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free Contact options
  • Aeronautical option
  • Negative gauge calibration included as standard
  • High resolution colour touch screen operation
  • Intuitive icon task driven menu structure
Strumentazione per la pressione e la misura della deformazione - Visualizza i prodotti correlati

Descrizione

PACE5000/PACE6000 employs full digital control to provide high control stability and high slew rate, while its digitally characterised pressure sensor offers the quality, stability, higher bandwidth and precision associated with this latest generation of piezo-resistive and TERPS pressure sensors.

The PACE5000/PACE6000 pneumatic modular pressure controller brings together the latest control and measurement Druck technology from Baker Hughes, a GE company to offer an elegant, fast, flexible and economical solution to pressure control for automated production, test and calibration.

The new PACE pneumatic modular pressure controller brings together the latest control and measurement technology from GE to offer an elegant, fast, flexible and economical solution to pressure control for automated production, test and calibration.

PACE employs full digital control to provide high control stability and high slew rate, while its digitally characterised pressure sensor offers the quality, stability, higher bandwidth and precision associated with this latest generation of piezo-resistive and TERPS devices.



PACE5000 Chassis
• Single channel pressure controller chassis
• Easy to use colour touch screen display
• Can be used with any interchangeable
PACE CM control module as a bench top or
rack mounted pressure controller
• Intuitive task driven menu with basic, preset
& divide as standard
• Switch test, leak test, burst test, test program,
analogue output and voltage free contacts available
as optional tasks
• Multi Language - any additional language to suit
specific requirements can easily be translated & downloaded
• RS232, IEEE connectivity, Ethernet and USB as standard

PACE6000 Chassis Additional features:
• Dual channel pressure controller chassis
• With two PACE CM control modules fitted the PACE6000
can be used in single, auto-ranging or simultaneous dual pressure control mode*
• Aeronautical option enabling full control in aeronautical units
• No module pressure range ratio limit

PACE5000/6000 Options

Switch Test
Switch Test automates the testing of pressure switch devices. Following the test, the pressure at which contacts open and close and the switch hysteresis is displayed. Switch Test Task can also be set to repeat several times to exercise a switch or capture switch toggle max, min and average values.

Leak Test
Leak Test applies a test pressure(s) to an external system connected to the instrument to determine the magnitude of pressure variations due to leaks. This application sets the test pressure and a dwell time to eliminate potential adiabatic effects at the test pressure and the leak test time period. On completion, the display shows the Start Pressure, End Pressure, Pressure Change and Leak Rate.

Test Program
The Test Program option provides a facility for creating, storing and executing numerous test procedures within the instrument itself. This is particularly useful for longer, more repetitive and laborious procedures requiring manual inputs for rapid prototyping, manufacturing and life cycle testing. Test Programs can also be transferred to a PC using a mass storage device for further editing, and copied back from the mass storage device to the instrument.

Burst Test Burst Test is an application for the PACE Series designed primarily for the testing of pressure rupture discs. The burst test option applies a controlled increase of pressure and accurately measures the exact point at which the device rupture or burst occurs.

Volt Free Contacts (VFC) Volt Free Contacts enable control of peripheral devices such as vacuum pumps, ovens, etc. Each VFC option has three independent volt-free NO/NC relay contacts. A number of conditions can be set within a PACE instrument to trigger a relay toggling its contacts.

Analogue Output The analogue output can be programmed via the setup menu screen to output a signal proportional to the instrument range selected. This allows the instrument to interface with PC or PLC I/O cards, remote displays, chart recorders or other data logging equipment.
Users can select outputs of 0 to 10 V, 0 to 5 V, -5 to 5 V and 0/4 to 20 mA. Precision with respect to host instrument measured pressure 0.05% FS over the host instrument operating temperature range, variable update rate to 80 readings per second. The option is programmable between minimum and FS pressure for proportional output against pressure.

Aeronautical Option (PACE6000 only, to be used with PACE CM2-A control modules)
Simultaneous control of calibrated airspeed and altitude (when used with two PACE CM2-A control modules) with a “go to ground” function.

Indication and control available in pure aeronautical units:

Altitude- feet or meters
Air Speed- knots or km/hour, mph
Mach- mach number
Rate of climb– feet or meters/minute, second
† Tutti gli importi indicati in EUR

Manuali dei prodotti:

Download Pressure Automated Calibration Equipment
Download Pressure Automated Calibration Equipment
Download Pressure Automated Calibration Equipment
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >