Water Meter for Totalization and Rate Indication with Pulse Output

FTB8000B Series

Water Meter for Totalization and Rate

Vedi tutti i modelli qui sotto

INVIA ORDINE

Water meter with Flow Rates from 0.22 to 132 USGPM
150 psi Maximum Operating Pressure
40°C (105°F) Maximum Operating Temperature
Field-Adjustable Pulse Output (Optional)
Note: scaling is in US gallons

Flussimetri a turbina e a palette - Visualizza i prodotti correlati

Descrizione

The water meter of the FTB8000B Series use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000B meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid state, longlasting Hall-effect sensor, which requires power. -PT model meters use a 2-wire reed switch. They provide a dry-contact closure and do not require power. Basic FTB8000B meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

Water meter, NPT Size, Flow Range (USGPM), Pulses per Gallon(Default Setting)

FTB8007B