Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521

Liquid Flow Transmitter and Switch

FSW-9000 Series Liquid Flow Trasmitter and Switch

Liquid Flow Transmitter and Switch | FSW-9000 Series Liquid Flow Trasmitter and Switch

Liquid Flow Transmitter and Switch

715,00 FSW-9212

1 anno di garanzia RoHS
  • High Reliability — No Moving Parts
  • 4 to 20 mA, PNP/NPN (Transistor), or Relay Output
  • Excellent Low Flow Sensitivity
  • Can Operate in Temperatures up to 120°C (248°F) with Sanitary Option
Flussimetri ad area variabile , rotametri ed interruttori - Visualizza i prodotti correlati

Descrizione

The FSW-9000 Series is a flow switch monitor that measures the velocity of the flow. It is ideal for use in measurement and control liquid applications. The FSW-9000 Series provides two output options: a 4 to 20mA analogue output and a PNP/NPN output. For the 4 to 20 mA output, the electronics’ module converts the signal from the probe to a 4 to 20 mA analogue output, which can be used to indicate flow rate. For the PNP/NPN output, the measured flow rate is compared to the setpoint value selected by the user and the switch changes state once the setpoint value has been achieved.

The FSW-9000 Series microprocessor based electronics and unique self-calibration program gives the flow switch superior temperature compensation, a fast response time (adjustable from 3 to 10 seconds) and increased long term switch point stability. Even in the event of a power failure, the calibration program will store values for maximum and minimum flows for up to 10 years.

A chain of 8 LED’s gives the user a visual indication of the flow rate as well as setpoint status, and one di-chromatic LED indicates switch point status. In addition, if there is a problem with the unit, the 8 LED’s will flash continuously providing troubleshooting information. The conical shape of the sensor’s tip means that the probe can be installed at almost any angle in the pipe and that if the probe is misaligned, accuracy will not be affected. The sensing element and connection of the FSW-9000 Series are made with 316 SS and the standard enclosure is glass-fillednylon. The FSW-9000 Series can be made with a great variety of process connections such as threaded, flange, or hygienic and is also available in an aluminium enclosure for hazardous environments. Intrinsic safety barriers required for explosion proof areas.

The FSW-9000 Series nominal measuring range is 0.04 to 2.0 m/s. The switch can be set to trip at any value in this range. To calculate the velocity for your application, use the following simple formula: V= (1.27 X Q)/D2 Q = Flow rate in metres per second D = Pipe internal diameter in metres V = Fluid velocity in metres per second Please note that the 4 to 20mA option is scaled over 0 to 2.0 m/s.

The FSW-90-R is very similar to the FSW-9000 Series with one main difference: The sensor is separate from the electronics and it does not have an enclosed housing. This gives the FSW-90-R Series the ability to be installed in very small pipes and be remotely controlled by the FSCN-91 relay. The FSW-90-R Series is the ideal solution when there is not a lot of space to install even a compact unit or when there is a need for a mounted relay. In addition, the conical shape of the sensor’s tip allows the probe to be installed at almost any angle in the pipe, and if it is misaligned, accuracy will not be affected. The FSW-90-R is made with 316 SS. FSCN-91 relay can operate with DC or AC supply voltage and provides an analogue 4 to 20mA and SPDT output. The FSCN-91 enclosure is made with ABS and can be mounted on a DIN rail or by using 2 fixing screws.
Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.
Q.tá
RoHS
Descrizione
Quick Ship
  
FSW-9212
715,00
Stock: 9 settimane
Coformità RoHS
24 Vdc, 3/4" NPT, 2" length, nylon head with cable gland entry and 2 m (6') of cable, for 1 to 4" pipes
Quick Ship
  
FSW-9512
890,00
Stock: 1 settimana
Coformità RoHS indeterminata
24 Vdc, 1 1/2" Tri-Grip™, 2" length, nylong head with cable gland entry and 2 m (6') of cable, for 1 to 4" pipes
Quick Ship
  
FSW-91-R
362,00
Stock: 1 settimana
Coformità RoHS
Flow sensor requires relay electronics, DC or AC power available, 1/2" NPT with 2 m (6.5') cable
Quick Ship
  
FSCN-91
400,00
Stock: 9 settimane
Coformità RoHS
Electronics for FSW-91-R, relay for flow switch supply of 24 Vdc
Quick Ship
  
FSCN-92
410,00
Stock: 9 settimane
Coformità RoHS
Electronics for FSW-91-R, relay for flow switch supply of 85 to 240 Vac
Accessories
Quick Ship
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con 70A-1
70A-1
€25.00
Stock: In magazzino
Coformità RoHS indeterminata
Continuous tone alarm
Quick Ship
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con TX4-100
TX4-100
€33.00
Stock: In magazzino
Coformità RoHS
4-Core 7/0.2 mm screened cable white, red, green & black with drain wire, 30 metres
Quick Ship
Clicca per espandere/minimizzare una lista di quello che altri hanno comprato con LP-PS-1524
LP-PS-1524
€49.00
Stock: In magazzino
Coformità RoHS
DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz
Tutti gli importi indicati in EUR
Nota: Comes complete with operator's manual.