Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Electronically Controlled Proportional Valves

FSV10 Series

Electronically Controlled Proportional Valves | FSV10 Series

Electronically Controlled Proportional Valves

736,37 FSV12

CE
  • Pulsewidth-Modulated Control Circuit
  • Accepts 0 to 5 Vdc or 4 to 20 mA Setpoint Inputs
  • Made of Corrosion- Resistant 316 and 416 SS/FKM
Valvole - Visualizza i prodotti correlati

Descrizione

The FSV10 Series electronic proportioning solenoid valves can control the flow of a wide variety of gases and liquids. The variablestroke electromagnetic valve is pulsed by the driver electronics, maintaining the correct magnetic flux level in the solenoid and holding flow at the level of the analog input setpoint signal. A TTL-level input allows the valve to be shut off regardless of analog setpoint signal.
The output power level of the driver electronics is jumper selectable for cooler, more efficient operation. The FSV10 Series requires 12 to 30 Vdc, supplied by the optional FSV-PW 110 Vac plug-in power supply or via the 9-pin D connector (included). These valves come with 8 inches of wire, which must be soldered to the 9-pin D connector.

SPECIFICATIONS
Turndown Ratio: 100:1
Response Time: 500 msec max
Fluid Temperature Range: -10 to 54°C (14 to 130°F)
Typical Valve Surface Temperature: 54°C (130°F) with 24 Vdc power input
Required Power Input (Not Included): 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack
Connection: ¼" compression fittings
Setpoint Input Signal: 0 to 5 Vdc or 4 to 20 mA
Valve Dimensions: 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings
Driver Electronics: 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1")
Materials in Fluid Contact: 316 and 416 SS, FKM O-rings
Maximum Pressure: 500 psig (3448 kPa)
Maximum Differential Pressure: 50 psid (345 kPa); 35 psid (241 kPa) for FSV15
Leak Integrity: 1 x 10-9 sccs; helium, individually tested
Ambient Temperature: 0 to 50°C (32 to 122°F)
CE Compliance: EMC Directive
89/336/EEC EN55011:1991; Group 1,
Class A EN50082-2:1995
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
FSV11
736,37
Stock: 1 settimana
 
0.51(0.02) orifice size, 0.009 Cv, 3500 mL/min Air, 125 mL/min Water at Maximum Flow
FSV12
736,37
Stock: 6 settimane
 
1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow
FSV12-EPR
736,37
Stock: 6 settimane
 
1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow - Ethylene Propylene Rubber seal
FSV13
736,35
Stock: 6 settimane
 
1.4 (0.055) orifice size, 0.055 Cv, 21,500 mL/min Air, 700 mL/min Water at Maximum Flow
FSV14
736,37
Stock: 6 settimane
 
1.6 (0.063) orifice size, 0.068 Cv, 25,000 mL/min Air, 850 mL/min Water at Maximum Flow
FSV15
675,57
Stock: 6 settimane
 
3.18 (0.125) orifice size, 0.24 Cv, 100,000 mL/min Air, 2873 mL/min Water at Maximum Flow
Tutti gli importi indicati in EUR
Nota: Comes complete with operator’s manual, driver module and 9-pin D connector.
*Based on 10 psig (690 mbar) differential pressure.
We noticed you are from the US. Visit your local site for regional offers and live support.