Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Oval Gear Totaliser for Viscous Liquids

FPDM3000

Totaliser for Viscous Liquids | FPDM3000

Totaliser for Viscous Liquids

1.635,92 FPDM3004

1 anno di garanzia CE
  • Aluminium or Stainless Body
  • Higher Temperatures up to 120ºC (“-HT” Option)
  • NPT or BSP Threads
  • DIN, JIS or ANSI Connections (1" and Larger Sizes)
Flussimetri a turbina e a palette - Visualizza i prodotti correlati

Descrizione

The FPDM3000 Series positive displacement oval gear flow meters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of many viscus fluids. Three choices of wetted material combinations are available for compatibility with a large variety of liquids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPDM3000 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.

Specifications
Accuracy: ±1% of reading
Repeatability: ±0.03%
Fitting Type
    NPT: Female
    BSP: “-BSP” option
    DIN: “-DIN” option
    JIS: “-JIS” option
    ANSI: “-ANSI” option
Total: Resettable
Accumulated-Total: Non-resettable
Minimum Viscosity: 1cPs
Maximum Viscosity: 1000 cPs standard
Strainer Size: 200 mesh (74ì)
Mounting: Shafts must be in a horizontal plane
Mounting: Pipe
Liquid Temperature: -40 to 80°C (-40 to 176°F); -40 to 120°C (-40 to 248°F) (“-HT” option)
Maximum Pressure: 3400 kPa (500 psi)
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
FPDM3204
3.532,00
Stock: 7 settimane
 
Pipe Size 1⁄2", Flow Range; <5cPs 3 to 25 LPM (0.8 to 6.6 GPM), >5cPs 2 to 30 LPM (0.5 to 8 GPM)
FPDM3205
4.521,00
Stock: 7 settimane
 
Pipe Size 1", Flow Range; <5cPs 10 to 100 LPM (2.6 to 26 GPM), >5cPs 6 to 120 LPM (1.6 to 32 GPM)
FPDM3006
3.088,00
Stock: 1 settimana
 
Pipe Size 11⁄2", Flow Range; <5cPs 15 to 235 LPM (4 to 62 GPM), >5cPs 10 to 250 LPM (2.6 to 66 GPM)
FPDM3206
7.131,00
Stock: 7 settimane
 
Pipe Size 11⁄2", Flow Range; <5cPs 15 to 235 LPM (4 to 62 GPM), >5cPs 10 to 250 LPM (2.6 to 66 GPM)
FPDM3007
5.186,00
Stock: 7 settimane
 
Pipe Size 2", Flow Range; <5cPs 15 to 500 LPM (4 to 130 GPM), >5cPs 16 to 500 LPM (4 to 130 GPM)
FPDM3207
12.356,00
Stock: 1 settimana
 
Pipe Size 2", Flow Range; <5cPs 15 to 500 LPM (4 to 130 GPM), >5cPs 16 to 500 LPM (4 to 130 GPM)
Tutti gli importi indicati in EUR
Nota: Standard models totalise in US Gallons. For units that totalise in Litres add suffix -L to the model number; no additional charge.
For units with BSP connections add “-BSP” to the model number no additional charge.
For units with DIN flanges add “-DIN” to the model number for an additional charge.
For units with JIS flanges add “-JIS” to the model number for an additional charge.
For units with ANSI flanges add “-ANSI” to the model number for an additional charge.
For FPDM3200/FPDM3300 units with high viscosity rotors add “-HV” to the model number for an additional charge.
For FPDM3200 units made for higher temperatures add “-HT” to the model number for an additional charge.
We noticed you are from the US. Visit your local site for regional offers and live support.