Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Multi-tube Variable Area Flow Meters/Gas Proportioning Variable Area Flow Meters

FL-1,2,3,4,5,6,7,8GP

Multi-tube Variable Area Flow Meters/Gas Proportioning Variable Area Flow Meters | FL-1,2,3,4,5,6,7,8GP

397,30 FL-1GP

2 anni di garanzia
  • ±2%FS Accuracy
  • Back Pressure Compensated for Accurate Blending
  • Blend Up To Three Gases
  • Save on Cost of Custom Gas Mixtures
  • Vary Concentrations With Operating System
  • For Use With 150 mm Flow Tubes
  • Bench Mount Tripod Base Optional
  • Standard 6-Turn Valves or Precision 16-Turn Valves Available
Flussimetri ad area variabile ed interruttori - Visualizza i prodotti correlati

Descrizione

Click on this link if you need more information about Variable Area Flow Meter.

To blend two or three gases in homogeneous infinitely variable concentrations, directly at the end use point, these variable area flow meters are unsurpassed in convenience and economy. Gas proportioning variable area flow meters pay for themselves in a short period of time since their use eliminates the need for expensive custom blended gas mixtures from outside sources. This series of variable area flow meters lend flexibility and economy to the efficient utilization of component gas cylinders and piped in supply lines. Another significant advantage in laboratory use is the freedom to reproducibly increase or decrease concentrations during the course of an experiment.

The flowrates of component gases are not affected by downstream pressure variations as long as back pressures do not exceed or approach the input pressure.


150 mm Flowtube, Gas Flow Capacities of Routine Gases
Ranges in cc/min, flowtubes have 10:1 range
Model No. Valve Type End Fittings
Models for 2 Flow Tubes
FL-1GP-(*)-(*) Standard Aluminum
FL-2GP-(*)-(*) Precision Aluminum
FL-3GP-(*)-(*) Standard 316 SS
FL-4GP-(*)-(*) Precision 316 SS
Models for 3 Flow Tubes
FL-5GP-(*)-(*)-(*) Standard Aluminum
FL-6GP-(*)-(*)-(*) Precision Aluminum
FL-7GP-(*)-(*)-(*) Standard 316 SS
FL-8GP-(*)-(*)-(*) Precision 316 SS
*Specify flow tube and float from flowtube table at right.

Float Materials:
G
= black glass
SA = sapphire
ST = 316 SS
C = carboloy




SPECIFICATIONS
Accuracy: ±2% FS, from 10% to 100% of scale
Repeatability: ±0.25% FS
Max Pressure: 200 psig
Scaled Pressure: 50 psig
Max Temperature: 250°F (180°F for water)
Flow Tube: Borosilicate glass
End Fittings: Black and anodized aluminum or 316 SS
Packing and O-Rings: Buna in aluminum models, FKM -A in 316 SS models
Side Panels: Black anodized aluminum
Connections: 1/8 FNPT
Tube
No.
Air Argon CO2 He H2 N2 O2
45G 83 67 97 73 169 85 74
45SA 127 104 146 117 267 131 114
45ST 242 200 265 241 535 249 218
45C 415 343 437 450 967 426 376
41G 191 161 203 195 399 197 166
41SA 270 229 279 302 662 283 246
41ST 460 383 478 573 1185 471 442
41C 743 625 702 1094 2013 771 719
61G 324 270 346 333 844 331 294
61SA 505 412 494 569 1209 467 460
61ST 825 687 771 1089 2432 833 764
61C 1275 1062 1132 1972 3732 1303 1175
02G 1086 855 934 1779 3110 1016 930
02SA 1324 1115 1168 2468 4289 1340 1228
02ST 2024 1717 1724 4083 6740 2034 1905
02C 2912 2472 2521 6927 9979 2997 2703
03G 2008 1697 1747 4214 6711 2039 1865
03SA 2590 2186 2264 5656 8995 2643 2503
03ST 3903 3274 3343 8669 14490 3731 3685
03C 5547 4697 4691 12717 19993 6169 5210
04G 5528 4794 4954 12540 18862 5801 5381
04SA 7240 6163 6217 15703 25235 7415 6826
04ST 10813 9077 9178 24629 38556 11044 10335
04C 15322 12904 12879 34709 55936 15433 14451
05G 9294 7705 7888 19830 30900 9419 8749
05SA 11647 9969 10042 26008 45263 11955 11137
05ST 17311 14489 14420 40831 60300 17525 16353
05C 24065 20744 20099 59702 86369 24549 22905
39G 19767 17978 17936 48193 73500 21676 19931
39SA 27514 23001 54010 63240 97000 27449 25800
39ST 38995 33778 33087 98676 142000 40086 36821
39C 55293 47151 45745 139847 200500 55930 52494
40G 49374 41899 40520 125617 182239 50258 46851
40SA 62480 53038 51220 159976 231239 63595 59304
40ST 89880 76322 73584 231946 333775 91478 85341
40C 123846 105182 101303 321265 460942 126041 117615
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
Sample Configurations - Please consult Flow Engineering for Specific Models
FL-1GP-45G-45G
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Two tubes, standard valve, aluminum end fittings; two 83 cc/min (air) tubes
FL-1GP-45G-45ST
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Two tubes, standard valve, aluminum end fittings; one 83 cc/min (air) tube and one 242 cc/min (air) tube
FL-2GP-41G-41G
692.74
Stock: 6 settimane
 
Two tubes, precision valve, aluminum end fittings; two 191 cc/min (air) tubes
FL-2GP-45ST-45ST
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Two tubes, precision valve, aluminum end fittings; two 242 cc/min (air) tubes
FL-4GP-03ST-03ST
968.58
Stock: 1 settimana
 
Two tubes, precision valve, 316 SS end fittings; two 3903 cc/min (air) tubes
Tutti gli importi indicati in EUR
Nota: Comes complete with correlation table for each tube and instruction sheet.

Select the desired 150mm flow tube from those listed, delete the FLT-prefix and insert the remaining suffix from the flow tube into the model numbers.

For NIST calibration, add suffix "-NIST AIR" to model number, contact sales for price.

Ordering example: FL-5GP-61G-41SA-03C calls out a gas proportioner for three gasses with standard valves and aluminium end fittings with tubes FLT-61G, FLT-41SA, and FLT-03C installed.
We noticed you are from the US. Visit your local site for regional offers and live support.