Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
The DOTX441 dissolved oxygen analyzer is
supplied in a compact cast aluminum case. SAE 323,
with low oxidation grade, anticorrosion treatment and
finished with electrostatic epoxy paint. The DOTX441 is
compact, light weight, rugged and IP-68 rated. The units include
local display, transmitter output and controller function all
programmed via a 3-button side panel with an easy self guided
menu. The DOTX441 can be mounted on a 51 mm (2") tube or flat
surface. Electrical connections are on the terminal bar located in
the back housing of the instrument with cable entrance through
two cable compression fittings of 13 mm (½") BSP. Common
applications include food and drink, pulp and paper, chemical,
sanitation, water and wastewater treatments.
SPECIFICATIONS Case Cast: Aluminum SAE 323 Finishing: Electrostatic epoxy paint Electrical Connection Connector Bar: Conexell type Cable Inlet Cable Knockout: 13 mm (½") (2 x) Assembly: 51 mm (2") tube or flat surface Identification: SS tag Enclosure: NEMA 7X (IP68) Power Consumption: 3.5 VA Weight: 1.9 kg (4.3 lb) Electrical Power: 90 to 240 Vac (50/60 Hz) Working Temperature: 5 to 40°C (41 to 104°F) Relative Humidity: 20 to 80%
Analyzer/Transmitter Display Alphanumeric: 2 lines x 16 characters Range: 0 to 60 mg O2/L Resolution: 0.1 or 0.01 Relative Precision: 0.02% (full scale) Working Temperature: 50°C (122°F) Auto Temperature Compensation: 50°C (122°F) Measuring Principle: Clark polarographic cell Response Time: 20 s (programmable) Barometric Pressure Compensation: Up to 10.000 m Signal Output Analogic: 4 to 20 mA with programmable output range for all reading range Galvanic Isolation: 2000 Vac (by opto coupler) Line Resistance: 1 kΩ
Controller Actuation Type Frequency: Modulation, P+D Set-Points: 2 independent from 0 to 100% of scale Outputs: 2 control ON/OFF, programmable for alarm or actuation P+D Control for Automatic Cleaning: Timer ON/OFF, for periods up to 99 seconds, and in intervals up to 99 hours
Cell Type: Immersion Body material: polypropylene (PP) or 316 SS Maximum Temperature: (@ 1 ATM) 50°C (122°F) Body Length: 1.5 m (59"), standard Auto Cleaning System: Activated by a solenoid valve
† Tutti gli importi indicati in EUR Nota: Comes complete with 304 SS clamps with nuts and bolts for mounting, and operator’s manual. Sensor sold separately. Esempio di Ordinazione: (1) DOTX441 Dissolved oxygen analyzer, transmitter and controller, €1,121.00
We noticed you are from the US. Visit your local site for regional offers and live support.