Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521

Cement-On Surface Thermocouples

CO4-K Series

Cement-On Surface Thermocouples | CO4-K Series
Nuovo

Cement-On Surface Thermocouples

90,00 CO4-K-40

1 anno di garanzia
  • Ultra-Fast Response Time < 10 milliseconds
  • Made from 0.05 mm Thick Foil and 0.025 mm Diameter Thermocouple Wire
  • Very Low Thermal Inertia
  • Ideal for Surface Temperature Measurement
  • Lead Length Options for Style 4: 1 m (40"), 2 m (80"), or 3 m (120") Long. Additional Lengths are Available Upon Request
Termocoppie - Visualizza i prodotti correlati

Descrizione

Omega introduces its cement-on, ultra-fast response thermocouples for fast surface temperature measurement applications, CO4. This Style is made from 0.05 mm thermocouple alloy foil, a special process where the butt-welded thermocouple junction is 0.05 mm in thickness. CO4 is flat, extremely low inertia construction and is an ideal means of measuring the temperature of both flat and curved metals, and plastic and ceramic surfaces where the very fast response is desired.

Omega's cement-on CO4 thermocouples are fabricated from ANSI "Special Limits of Error" grade thermocouple materials in "K" calibrations and yield accurate temperature indication when used with standard thermocouple instrumentation. CO4 has the fastest response due to a 32-gauge thermocouple wire.

 
Cement-on “CO4” thermocouples are the easiest to install. The foil sensor is embedded between two paper-thin Kapton high-temperature polymer laminates, which both support and electrically insulate the foil section as well as provide a flat surface for cementing. The polymer/glass laminate, in general, determines the maximum temperature of the construction which is 260°C (500°F) continuous and up to 370°C (698°F) for short duration. The CO4 comes in a 1 m, 2 m, or 3 m PTFE insulated 32-gauge thermocouple wire which is bonded to the foil and strain relieved by the laminate. An application instruction sheet accompanies each package.


 

Model No. Style Thermocouple Type Length
mm (inches)
Maximum Temperature °C* (°F)
Continuous 600 hr. 10 hr.
CO4-K-40 4 K CHROMEGA™-ALOMEGA 1 m (40") 260°C (500°F) 315 °C(600°F) 370°C (700°F)
CO4-K-80 K CHROMEGA™-ALOMEGA 2 m (80") 260°C (500°F) 315 °C(600°F) 370°C (700°F)
CO4-K-120 K CHROMEGA™-ALOMEGA 3 m (120") 260°C (500°F) 315 °C(600°F) 370°C (700°F)



View the Thermocouple Accuracy and Colour Code charts

Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
STYLE 4
Quick Ship
CO4-K-40
90.00
Stock: 13 settimane
 
Type K (CHROMEGA™-ALOMEGA™), 1 m lead, cement on Thermocouple
Quick Ship
CO4-K-80
95.00
Stock: 13 settimane
 
Type K (CHROMEGA™-ALOMEGA™), 2 m lead, cement on Thermocouple
Quick Ship
CO4-K-120
99.00
Stock: 13 settimane
 
Type K (CHROMEGA™-ALOMEGA™), 3 m lead, cement on Thermocouple
Tutti gli importi indicati in EUR
Nota: Response time when "grounded" or "cemented" to surface: Style 4 — < 10 milliseconds,
The response time or "time constant" is the time required to reach 63.2% of an instantaneous temperature change.
Additional length wire can be ordered for Styles 4
The temperature range high limits given are greatly influenced by environmental conditions, installation method, accuracy and lifetime requirements and may vary from the general guidelines listed in the table.
Style 4 cannot be used with CC High-Temperature Cement; CC Cement will break down insulation.