1/32 DIN Temperature/Process Controllers with 2 Outputs Standard and Optional Communications

CN1632 Series

Vedi tutti i modelli qui sotto

INVIA ORDINE

PID Autotune
Universal Inputs, Accepts Thermocouple, RTD, Voltage or Current Inputs
Large Display Available in Red or Green
2 Amp Relay and dc Pulse Standard
NEMA-4 (IP66) Front Panel

OPTIONAL
RS-485 Communications MODBUS RT Protocol
Second Alarm Relay
12 to 24 Vac/12 to 30 Vdc Low Voltage Power
UL Recognized (US) & (C)

Descrizione

The CN1632 series includes large, multi-colored LED’s that indicate process deviation, instrument operating mode and alarm conditions, clearly identifying the status of your process at all times. The high visibility four-digit display, available in red or green, is the largest available in an indicator/controller of this size. For use in systems, RS-485 MODBUS communications are available with up to 128 units addressable on the two-wire multi-drop line. A specially developed PID tuning algorithm provides superb general control. For unique performance requirements, you can select pre-tune followed by manual fine tuning. Easy programming via three keys provides straightforward daily operation and set-up. No internal hardware configuration is required. There are no switches or jumpers to change. Outputs include a relay and dc Pulse for primary control and alarming. There is also a second alarm relay available when communications are not included. The 2 A rated relays and a 10 Vdc pulse provide the highest capacity available in a 1/32 DIN controller. The universal input accepts seven thermocouple types, 2 or 3-wire RTD, dc mV, and mA inputs.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

CN1632-DC1-LV

Consultare l'Ufficio Commerciale

Stock:

Single dc Pulse control output with 2 A alarm relay and red LED display, Low Voltage Model

CN1632-GN-R1-C4

Consultare l'Ufficio Commerciale

Stock:

Single relay control output with dc Pulse, and RS-485 communications

† Tutti gli importi indicati in EUR

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

	(1)	(2
CN1632-

Descrizione delle opzioni:

(1) Options(Output-Display-Alarm-Comm) Seleziona da:
DC1 per Single relay output dc pulse
DC1-AL per Single relay output dc pulse and second alarm relay
DC1-C4 per Single relay output dc pulse and RS-485 communications
GN-DC1 per Single relay output dc pulse with green LED display
GN-DC1-AL per Single relay output dc pulse and second alarm with green LED display
GN-DC1-C4 per Single relay output dc pulse and RS-485 communications with green LED display
GN-R1 per Single relay output with green LED display
GN-R1-AL per Single relay output and second alarm relay with green LED display
GN-R1-C4 per Single relay output and RS-485 communications with green LED display
R1 per Single relay output
R1-AL per Single relay output with second alarm
R1-C4 per Sjingle relay output with RS-485 communications

(2) Power Supply Seleziona da:
Niente (lasciare il campo vuoto) per Standard Unit
-LV per 12 to 24 Vac/12 to 30 Vdc

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.