Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Commom Valve Configurations in Stock with Blank Valve Stations for Future Expansion
Custom Made to Order Configurations also Available
NEMA 4 (IP65) Rated Protection
Trun-to-Lock Manual Override
Din Rail or Panel Mount
Requires Air Filtration of 40 Micron or Better
Operates Under Air Pressure of up to 8 bar (116 psi)
Temperature Range of -5 to 50°C (23 to 122°F)
Descrizione
The VM10 series Valve Islands have been
discontinued, we currently do not have a replacement product.
The VM10 Series valve islands are stocked in
common configurations and are available in
2- or 4-way directional control valves. These
valves are well suited for operation with
PLC’s with low power consumption. The VM10 valve islands
provide high flow for a compact valve bank,
0.44 Cv from the 4-way directional (5/2)
control valve. All valve islands share a
common supply and exhaust channel.
Electrical connections are made easy with
25 or 44 pin D-sub cable connections.
Made-to-order valve islands
are available which may include mixed valve
types, dual pressure supply, different or
multiple tubing connections, internal/
external piloting, or a pneumapole (quick
disconnect) base with bottom or side tubing
connections for panel mount or through
enclosure mounting applications.
The 2-way (2 x 3/2) style valve contains
two independent 2-way valves (3/2) per
valve slice. The 4-way (5/2) style valve is
known as a 4-way directional control valve,
for controlling double-acting pneumatic
cylinders. These valves banks are normally
closed, internally piloted solenoid valves
that share common ports.
SPECIFICATIONS Electrical: 24 Vdc, 0.6 W per solenoid
with LED indication, tolerance ±10%
Surge Suppression: Flywheel diode Electrical Communication: Negative
common, 25 or 44 pin D-sub connector Actuation Time: 14 miliseconds Medium: Compressed air, filtered,
lubricated or non-lubricated Port Sizes, PIF (Push-in-Fittings): Stock valves 1/4, available in
1/8, 5/32, and 1/4", 3, 4, and 6 mm Operating Temperature: -20 to 50°C
(-4 to 122°F) Operating Pressure: Internal pilot
3 to 8 bar (43.5 to 116 psig) external pilot 28” Hg to 116 psig Air Flow: 5/2 valves 430 l/min (Cv 0.44); 2 x 3/2 valves 350 l/min (Cv 0.36) Materials: Body and End Plates: Engineered PPA co-polymer
Valves: Aluminum with nitrile rubber seals Tubing Requirements: Polyurethane
(85-95D hardness) or nylon 11 or 12
A data sheet is available on our FTP site with additional information.
† Tutti gli importi indicati in EUR Nota: Pre-configured valve stations include as standard a left hand feed, right side blocked 5/16 port end plate. Comes with optional DIN rail mount kit, and equipped with 2 X 3/2 double valve solenoids. Multipole sub-connector for easy connection and hookup are also standard. Two open stations for expansion flexibility are included on each island. Does NOT include a pneumapole base with valve stations. Esempio di Ordinazione: (1) OM-AIR-V11569-E03 25-pin D sub connector, 3m (10') long., €80.69