Rangeable Wet/Wet Differential Pressure Transmitter

PX2310

Vedi tutti i modelli qui sotto

INVIA ORDINE

Each Model has 4 Unidirectional and 4 Bi-Directional Ranges
4 Selectable Outputs, 0 to 5 Vdc, 1 to 5 Vdc, 0 to 10 Vdc, 4 to 20 mA (2-Wire)
Jumper Selectable Hi/Lo Ports
4-Digit LCD can Show Either Line or Differential Pressure
Pushbutton or Remote Zero
Rugged NEMA 4 Cast Aluminum Housing
Applications
Energy Management Systems
Process Control Systems
Flow Measurement
Liquid Level
Pressure Drops Across Filters

Trasduttori di pressione - Visualizza i prodotti correlati

Descrizione

The PX2310 offers the user unprecedented flexibility allowing field selection of range, type of output and field zeroing. The user can also select which port is hi and lo via jumpers. The 4-digit display can also be set to read either line pressure or differential pressure. The entire package is rugged cast aluminum with a NEMA 4 rating and the solid state sensor offers excellent accuracy, stability, and low long term drift.

SPECIFICATIONS
Accuracy RSS Ranges A, B & C: ±1.0%
    Full Scale; Range D: ±2.0% RSS full scale
Storage Temperature: -20 to 85°C (-4 to 185°F)
Operating Temperature: -20 to 85°C (-4 to 185°F) (Limits of Electronics only)
Compensated Range: 0 to 54°C (32 to 130°F)
Zero Shift (Over Compensated Range): 2.0% full scale
Span Shift (Over Compensated Range): 2.0% full scale
Response Time: 1 to 5 seconds, selectable
Proof Pressure: 2.2 x full scale
Burst Pressure: 40 x full scale
Vibration: 10 g from 50 to 2000 Hz
Shock: 200 g
Excitation: 12 to 30 Vdc @ 5 mA (typical)/18 to 28 Vac 40 mA (typical) (reverse polarity protected)
Output User Selectable:
    Voltage: 0 to 5 Vdc, 0 to 10 Vdc, 1 to 5 Vdc 3-wire system
    Current: 4 to 20 mA 2-wire system (0 to 1000 Ω load)
Minimum Supply Voltage: Vdc = 12 + 0.2 x loop resistance
Maximum Supply Voltage: Vdc = 30 + 0.004 x loop resistance
Electrical Connection: ½ in conduit
Pressure Connection: 1/8 -18 NPT internal
Sensor Cavity Volume: 0.2 cc
Case: Die cast aluminum, powder coated
Environmental Protection: NEMA 4
Wetted Parts: 17-4 PH stainless steel (not recommended for hydrogen)
Dimensions: 102 L x 152 W x 51 mm diameter (4.0 x 6 x 2")

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

PX2310-050DX

€1,003.00

Stock: 5 settimane

Wet/wet differential transducer with 0-50 psid max range

PX2310-100DX

€1,003.00

Stock: 5 settimane

Wet/wet differential transducer with 0-100 psid max range

PX2310-250DX

€1,003.00

Stock: 9 settimane

Wet/wet differential transducer with 0-250 psid max range

† Tutti gli importi indicati in EUR
Nota: Comes complete with operator’s manual.