Process Input Panel Meter with Large, 3-Colour Display

DP25B-E

^€420,74 DP25B-E

INVIA ORDINE

Big Bright 21mm Tri-Colour LED Display
Scaling in Wide Range of Engineering Units
Built-In Excitation
Analogue Output Optional
Dual Relays Optional
Tare Button
Peak Memory
For Strain/Load Cell Bridge Input Meter Click here

Strumentazione per la pressione e la misura della deformazione - Visualizza i prodotti correlati

Descrizione

The OMEGA DP25B series Digital Panel Meters feature the biggest brightest display of any 1/8 DIN panel meter. The user can select the display colour: RED ,AMBER, or GREEN.

PANEL METERS with Relays and Analogue Output
The popular DP25B series are accurate, economical, and easy to program. The DP25B series feature a big bright four digit display plus optional dual 5 amp Form C (SPDT) relays and a choice of isolated or non-isolated analogue output. The scalable 0-10 Vdc, 0-20mA, or 4-20 mA analogue output can be used as a retransmission of the display value or as a proportional control output as required. The microprocessor based DP25B series includes instruments for Thermocouple, Process (DC voltage and current) Strain Gauge, pH.

The DP25B Process Meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorised changes in setup. Four full digits and simplified scaling via the front-panel pushbuttons make it easy to set the display to read in any engineering units.

SPECIFICATIONS
Input Ranges: 0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
Isolation: Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260 Vrms or DC working voltage
NMR: 60 dB
CMR: 120 dB
Input Protection: Voltage Input = 120 Vrms max; Current Input = 100 mA max
Input Impedance: 100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
Display: 4-digit, LED 9-segment, 21 mm, (Red, Green, Amber)
Analogue-to-digital technique: Dual slope
Internal resolution: 15 bits
Read rate: 3/sec
Polarity: Automatic
Max error process: ±0.03% of reading, ± 1 count
Span tempco: 50 ppm/°C
Step response: 1 sec
Warm-up to rated accuracy: 30 min
Load Regulation: 1.1%
Line Regulation: 0.02% per Vac
Analogue output (optional): 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
Operating temperature: 0 to 50°C
Storage temperature: -40 to 85°C
Relative humidity: 90% at 40°C (non-condensing)
Panel cutout: 1/8 DIN, 45 x 92 mm
Weight: 575 g
AC Power Unit:
Power: 115 Vac or 230 Vac ±10%; 50-60 Hz, 11.0 watts max.
Excitation: 24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
DC Power Unit:
Power: 10-32 Vdc; 8.0 watts max.
Excitation: 24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness), For High Brightness use external excitation to power sensors

Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.

Q.tá

Descrizione

230Vac Powered. Process Voltage and Current Input Panel Meters

DP25B-E-230

€420.74

Stock: 1 settimana

1/8 DIN Process Meter.

DP25B-E-230-A

€544.04

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output

DP25B-E-230-R

€529.54

Stock: 7 settimane

1/8 DIN Process Meter. With Dual Relays

DP25B-E-230-AR

€660.11

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output and Dual Relays

DP25B-E-230-AI-R

€674.62

Stock: 7 settimane

1/8 DIN Process Meter. With Isolated Analogue Output and Dual Relays

115Vac Powered. Process Voltage and Current Input Panel Meters

DP25B-E

€420.74

Stock: 7 settimane

1/8 DIN Process Meter.

DP25B-E-A

€544.04

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output

DP25B-E-R

€529.54

Stock: 7 settimane

1/8 DIN Process Meter. With Dual Relays

DP25B-E-AR

€660.11

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output and Dual Relays

DP25B-E-AI-R

€683.80

Stock: 7 settimane

1/8 DIN Process Meter. With Isolated Analogue Output and Dual Relays

10-32Vdc Powered. Process Voltage and Current Input Panel Meters

DP25B-E-DC10/32

€573.05

Stock: 7 settimane

1/8 DIN Process Meter.

DP25B-E-DC10/32-A

€696.38

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output

DP25B-E-DC10/32-R

€681.88

Stock: 7 settimane

1/8 DIN Process Meter. With Dual Relays

DP25B-E-DC10/32-AR

€797.91

Stock: 7 settimane

1/8 DIN Process Meter. With Analogue Output and Dual Relays

DP25B-E-DC10/32-AI-R

€812.43

Stock: 7 settimane

1/8 DIN Process Meter. With Isolated Analogue Output and Dual Relays

† Tutti gli importi indicati in EUR
Nota: Power Options are not field installable. All units come complete with a operator’s manual.

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

	(1)	(2)	(3)
DP25B-

Descrizione delle opzioni:

(1) TYPE Seleziona da:
E per Process voltage and current inputs
S per Strain gauge bridge or process inputs

(2) Power Options Seleziona da:
per 115 Vac power leave blank
-230 per 230 Vac power
-DC10/32 per 10 to 32 Vdc power
-DC26/56 per 26 to 56 Vdc power

(3) Output Options Seleziona da:
per no options leave blank
-A per scaleable analogue output
-R per dual alarm relays
-AR per analogue and relay options
-AI-R per isolated analogue outputs and relay options

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.

Manuali dei prodotti:

Download DP25-E and DP25B-E - 1/8 DIN Process Panel Meter

Download DP25-E and DP25B-E - Quick Start Manual for DP25-E Process Meter