1/32 DIN Models iS32, Strain and Process Meters and Controllers

I-STRAIN

load cell indicators & controllers

^€319,26 DPIS32

INVIA ORDINE

Ideal for use with load cells
High Quality
FREE 5-Year Warranty
High Accuracy 0.03% Rdg
User Friendly, Simple to Configure
Free Software, Active X Controls

Strumentazione per la pressione e la misura della deformazione - Visualizza i prodotti correlati

Descrizione

The iS series meters and controllers can measure a wide variety of strain gauge, bridge and DC voltage inputs for all common load cells, pressure transducers, and most strain gauge transducers. It is the first instrument of its kind, offering a wealth of powerful features and performance in an amazingly compact 1/32 DIN package or a 1/8 DIN package with 21mm high digits.

The iS series handles dc input ranges of 0-100 mV, -100 mV to 1 V, 0-10 V and 0-20mA. The instruments are easy to configure and scale to virtually any engineering units using the push buttons on the front panel, or a PC with the optional serial communications and free configuration software. The serial communications option includes both RS-232 and RS-485 on one instrument, and the straightforward OMEGA ASCII communications protocol, as well as MODBUS protocol.

The iS series includes built-in excitation for transducers, selectable as 10 V at 100 mA or 5 V at 60 mA. The CNiS series controllers feature a choice of two optional outputs: Form C SPDT (single pole double throw) mechanical relays, solid state relays, DC pulse, and programmable analogue output selectable for either a control function or retransmission of the process value. The iS series features the iSeries totally programmable colour display that can change colour between Green, Amber, and Red at any set-point or alarm point.

SPECIFICATIONS
Input Ranges: 0-100 mV, -100 mVdc to 1 Vdc, 0-10 V, 0-20 mA
Isolation: 354 V peak per IEC spacing
NMR: 60 dB
CMR: 120 dB
Input Impedance: 10 MOhms for 100 mV input 1 MOhm for 1 or 10 V input 5 Ohms for 20 mA current input
Display: 4 digits, 9 segments tri-colour LED
Digit Height: iS32;10.2 mm; iS8; 21 mm
Analogue-to-Digital technique: Dual slope
Internal A/D Resolution: 15 bits
Read rate: 3 readings per second
Polarity: Automatic
Max Error Strain/Process: ±0.03% rdg.
Span tempco.: ± 50 ppm / C
Step response: 1-2 sec.
Warmup to rated accuracy: 30 min.
Analogue Output (optional): 0-10 V, 4-20 mA, can be used as Retransmission or PID Control.
Excitation Voltage: 10 V @ 100 mA, 5 V @ 60 mA
Power: 90-240 Vac 50-400 Hz or 90-375 Vdc, 4 W (optional) 24 Vac 50-400 Hz or 12-36 Vdc, 5 W
Dimensions:iS32: 25.4 H x 48 W x 127 D mm; iS8: 48 H x 96 W x 127 D mm
Weight:iS32; 127 g; iS8; 295 g
Approvals: CE per EN50081-1, EN50082-2, EN61010-1

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

DPiS32

€319,26

Stock: 1 settimana

1/32 DIN i Series strain gauge meter with 90-240 Vac/dc power

DPiS32-C24

€424,08

Stock: 7 settimane

1/32 DIN i Series strain gauge meter with RS-232 & RS-485 communications and 90-240 Vac/dc power

DPiS32-DC

€356,46

Stock: 7 settimane

1/32 DIN i Series strain gauge meter with 24 Vac or 12-36 Vdc power

DPiS32-C24-DC

Consultare l'Ufficio Commerciale

Stock:

1/32 DIN i Series strain gauge meter with RS-232 & RS-485 communications and 24 Vac or 12-36 Vdc power

DPiS8

€416.77

Stock: 7 settimane

1/8 DIN i Series strain gauge meter with 90-240 Vac/dc power

DPiS8-C24

€508.23

Stock: 7 settimane

1/8 DIN i Series strain gauge meter with RS-232 & RS-485 communications and 90-240 Vac/dc power

DPiS8-DC

€460.63

Stock: 7 settimane

1/8 DIN i Series strain gauge meter with 24 Vac or 12-36 Vdc power

DPiS8-C24-DC

Consultare l'Ufficio Commerciale

Stock:

1/8 DIN i Series strain gauge meter with RS-232 & RS-485 communications and 24 Vac or 12-36 Vdc power

CNiS822

€508.48

Stock: 7 settimane

1/8 DIN i Series strain gage controller with two solid state relays and 90-240 Vac/dc power

CNiS822-C24

Consultare l'Ufficio Commerciale

Stock:

1/8 DIN i Series strain gauge controller with two solid state relays, RS-232 & RS-485 communications and 90-240 Vac/dc power

CNiS3222

€397.94

Stock: 7 settimane

1/32 DIN i Series strain gauge controller with two solid state relays and 90-240 Vac/dc power

CNiS3222-C24

Consultare l'Ufficio Commerciale

Stock:

1/32 DIN i Series strain gauge controller with two solid state relays, RS-232 & RS-485 communications and 90-240 Vac/dc power

† Tutti gli importi indicati in EUR
Nota: Transducer excitation not available on models with serial communications ("-C24") option.

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

	(1)	(2)	(3)	(4)	(5)
CNIS

Descrizione delle opzioni:

(1) DIN Cutout Seleziona da:
32 per 32nd DIN
8 per 8th DIN

(2) Control Outputs #1 Seleziona da:
2 per Solid State Relay/0.5 A at 120/240 Vac continuous
3 per SPDT Relay
4 per Pulsed 10 Vdc at 20 mA
5 per Analog Output 0 to 10 Vdc

(3) Control Outputs #2 Seleziona da:
2 per Solid State Relay/0.5 A at 120/240 Vac continuous
3 per Relay SPDT 3A at 120/3 A at 240 Vac
4 per Pulsed Driver 10 Vdc at 20 mA /for use with external SSR

(4) Serial Communications Seleziona da:
Niente (lasciare il campo vuoto) per Standard Unit
-C24 per Isolated RS-232 and RS-485 300 to 19.2 k baud

(5) Power Supply Seleziona da:
Niente (lasciare il campo vuoto) per Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)
-DC per Low Voltage Power (24 Vac or 12 to 36 Vdc)

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.