Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521

FSW-160

Low Cost Flow Switches | Paddle Flow Switches | FSW-160

Low Cost Flow Switches | Paddle Flow Switches

179,85 FSW-160

2 anni di garanzia CE
  • Multiple Quick-Change Paddles
  • EPDM Seal
  • Field Adjustable Set Points
  • Direct Replacement for Most Paddle-Type Flow Switches
  • High Flow Sensitivity
  • Stainless Steel Paddles and Shaft
  • NEMA 1 (IP10) Enclosure
Flussimetri ad area variabile ed interruttori - Visualizza i prodotti correlati

Descrizione

The OMEGA™ FSW-160 is the newest heavy-duty line of flow switches. The switch is used to signal, start, or stop electronically operated equipment when flow or no-flow conditions occur.

Omega’s elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade. The FSW-160 can be used in pipes 1 inch and larger, with set-points as low as 4 GPM (15.2 LPM) to over 500 GPM (1893 LPM) in larger pipe sizes. The FSW160 uses a 15A SPDT micro switch that can control a 1/2 horsepower motor.

Specifications
Hysteresis (? Flow Rate to Activate/ Deactivate Switch)
    10% at upper end of flow range
    30% at lower end of flow range
Differential Pressure Drops Across Unit Under Normal Operating Conditions:
    1 to 3" pipe, less than 1 psi
    4 to 48" pipe, negligible
Working Line Pressure: 200 psig maximum [proof tested to 1200 psig at 21°C (70°F)]
Working Temperature: 121°C (250°F) maximum continuous
Wetted Materials:
    Body and Lid: Brass
    Shaft: 304 stainless steel
    Paddle: 316 stainless steel
    Seal: EPDM
Electrical Switch Characteristics SPDT 15 A, 1/2 hp at 125 or 250 Vac 0.5 A at 125 Vdc (tungsten lamp) 0.25 A @ 250 Vdc (tungsten lamp)
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
FSW-160
179,85
Stock: 6 settimane
 
Paddle flow switch brass 1 NPT, adjustable set-point
Tutti gli importi indicati in EUR
Nota: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.