Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Industrial Strength In-Line Plastic Flow Switches

FSW-140 Series

in-line plastic flow switch | FSW-140 Series

in-line plastic flow switch

Vedi tutti i modelli qui sotto

1 anno di garanzia
  • Pre-set Switch Points, 265 ml to 7.6 litres per minute
  • 3/8 NPT Male or ¼" Quick Disconnect Process Connections
  • Chemical Resistant Polypropylene
  • For Low Viscosity Liquids
Flussimetri ad area variabile ed interruttori - Visualizza i prodotti correlati

Descrizione

The FSW-140 Series rugged inline flow switches offer superior performance. Their fixed set-point and simple design make it a dependable switch. This series is an ideal choice for coolant applications requiring reliable flow detection in HVAC, semiconductor, welding, medical and other industries. The ¼" quick disconnect units have a host of snap-on mating adaptors available to fit most piping requirements.

Specifications
Wetted Materials:
    Housing: Glass reinforced polypropylene
    Piston: PPS composite
    Spring: 316 stainless steel
    O-Ring: Fluorocarbon
Operating Pressure:
    8.6 bar (125 psi) @ 21°C (70°F)
    3.4 bar (50 psi) @ 100°C (212°F)
Operating Temperature: -18 to 100°C (0 to 212°F)
Set Point Accuracy: 20% of set point
Set Point Differential: 20% maximum
Switch: SPST, 10VA, normally open at no flow
Electrical Termination: 610 mm (24") polymeric leads, 22 AWG
Filtration: 100 micron

Specifications
Thermoplastic Quick Couplings
Working Pressure: Vacuum to 120 psi (8.3 bar)
Operating Temperature: -40 to 82°C (-40 to 180°F) continuous
Materials:
    Bodies and Valves: Acetal
    I nternal Spring: 316 Stainless Steel E xternal Springs, Pin, Latch:
    Stainless Steel Seals: Buna, others available
    Color: Natural white, others available
Tubing Sizes: ¼ thru 3/8" ID, ¼ and 3/8" OD 6 x 4 mm thru 12 x 8 mm (OD x ID)
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
Plastic Flow Switch with 3/8" NPT Male Threads
Quick Disconnect Pastic Flow Switch (see couplings below)
Quick Release Couplings
FT-PLCD100-04BS
23.53
Stock: 1 settimana
 
1/4" Coupling with flow shut-off and 1/4" BSPT Male Thread
FT-PLCD100-06BS
18.92
Stock: 9 settimane
 
1/4" Coupling with flow shut-off and 3/8" BSPT Male Thread
FT-PLCD170-04
18.93
Stock: 1 settimana
 
1/4" Coupling with flow shut-off and 1/4" hose barb
Tutti gli importi indicati in EUR
Nota: Quick release fittings sold separately, see table above.

Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.