Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Pre-engineered Modular Components designed for a simple and sturdy beam construction, quick assembly and T-slot mounting platform for DLT Linear Actuators and DLM Rail Slides.

DMEX Series DIRECTCONNECT™ Mounting Stanchion Components

Pre-engineered Modular Components designed for a simple and sturdy beam construction, quick assembly and T-slot mounting platform for DLT Linear Actuators and DLM Rail Slides. | DMEX Series DIRECTCONNECT™ Mounting Stanchion Components

Vedi tutti i modelli qui sotto

INVIA ORDINE
  • Extruded Aluminium Beams with T-Slot Design for Quick Assembly
  • Three Sizes for Use with DIRECTCONNECT™ Base Slides and Thrusters
  • Gusset Kits Available to Quickly Connect Three Sizes of Mounting Stanchions
  • Nut Plate and Screw Kits for Mounting Slides and Thrusters
  • Straightness of 1 mm per metre and Flatness of 0.04 mm per 10 mm of Width
  • Maximum Twist of 21 mm per metre
  • Stock Sizes for Immediately Delivery or Custom Lengths Available
  • Quickly Assembly to Lower Cost
  • Wire/Tube Clamps and Slot Covers for Neat and Clean Machine Design
  • Cross Section Width 38 to 152 mm and Depth 19 to 76 mm
Mozione - Visualizza i prodotti correlati

Descrizione

DMEX Mounting Stanchion Components are pre-engineered modular units designed for a simple and sturdy solution for quick assembly of the DIRECTCONNECT™ series pneumatic linear thrister slides. Beams come in three sizes and are connected together at right angles using corner gussets, this design saves valuable design and assembly time. The smaller beams can be attached to the larger beams for additional configurations to fit any need.

The beams are extruded 6063-T6 Aluminium with a clear anodized finish and T-slots that correspond to the mounting patterns of the linear DLT and DLM slides. Gusset kits come with nut plates for easy assembly and the are wire/tube clamps for a neat and clean machine design.

A selection of stock lengths are available for immediate shipping and custom lengths can be ordered to meet your specific needs. Lengths are available up to 2.2 metres.

See Product Specs for Gussets and other stanchion accessories

Specifications
DMEX-08
DMEX-16
DMEX-25
Material
6063-T6 aluminium
Finish
Clear anodized
Weight per metre
1 kg
3.6 kg
10.9 kg
Bar Length
2.286 m ±3 mm
Section Area
3.87 cm2
13.23 cm2
40.32 cm2
Max Twist
21 mm per metre
Flatness
0.04 mm per 10 mm of width
Straightness
1 mm per metre
Moment of Inertia X
1.3 mm4
21 mm4
320 mm4
Moment of Inertia Y
5.32 mm4
83 mm4
1320 mm4


Dimensions
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
DMEX-08 SERIES
DMEX-08-6
Consultare l'Ufficio Commerciale  
Stock: 
 
 
152 mm (6") length of DMEX-08
DMEX-08-12
Consultare l'Ufficio Commerciale  
Stock: 
 
 
305 mm (12") length of DMEX-08
DMEX-08-18
Consultare l'Ufficio Commerciale  
Stock: 
 
 
457 mm (18") length of DMEX-08
DMEX-08-90
Consultare l'Ufficio Commerciale  
Stock: 
 
 
2286 mm (90") length of DMEX-08
DMGM-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Gusset kit
DMSC-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Slot cover [2.5 m (8') lengths] 1 pcs/ft of DMEX-08 or DMEX-16
DMEC-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
End caps with self tapping screws included
DMHC-001
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Hose clamp kits for tubing/cabling for DMEX-08 or DMEX-16
DMEX-16 SERIES
DMEX-16-12
Consultare l'Ufficio Commerciale  
Stock: 
 
 
305 mm (12") length of DMEX-16
DMEX-16-18
Consultare l'Ufficio Commerciale  
Stock: 
 
 
457 mm (18") length of DMEX-16
DMEX-16-24
Consultare l'Ufficio Commerciale  
Stock: 
 
 
610 mm (24") length of DMEX-16
DMEX-16-36
Consultare l'Ufficio Commerciale  
Stock: 
 
 
914 mm (36") length of DMEX-16
DMEX-16-90
Consultare l'Ufficio Commerciale  
Stock: 
 
 
2286 mm (90") length of DMEX-16
DMGM-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Gusset kit
DMSC-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Slot cover [2.5 m (8') lengths] 1 pcs/ft of DMEX-08 or DMEX-16
DMEC-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
End caps with self tapping screws included
DMHC-001
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Hose clamp kits for tubing/cabling for DMEX-08 or DMEX-16
DMHC-002
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Hose clamp kits for tubing/cabling for DMEX-16 or DMEX-25
DMEX-25 SERIES
DMEX-25-18
Consultare l'Ufficio Commerciale  
Stock: 
 
 
457 mm (18") length of DMEX-25
DMEX-25-24
Consultare l'Ufficio Commerciale  
Stock: 
 
 
610 mm (24") length of DMEX-25
DMEX-25-36
Consultare l'Ufficio Commerciale  
Stock: 
 
 
914 mm (36") length of DMEX-25
DMEX-25-48
Consultare l'Ufficio Commerciale  
Stock: 
 
 
1219 mm (48") length of DMEX-25
DMEX-25-90
Consultare l'Ufficio Commerciale  
Stock: 
 
 
2286 mm (90") length of DMEX-25
DMGM-25
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Gusset kit
DMSC-25
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Slot cover [2.5 m (8') lengths] 1 pcs/ft of DMEX-08 or DMEX-16
DMEC-25
Consultare l'Ufficio Commerciale  
Stock: 
 
 
End caps with self tapping screws included
DMHC-002
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Hose clamp kits for tubing/cabling for DMEX-25
ADDITIONAL MOUNTING COMPONENTS
DMEG-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Base gusset for DMEX-08, no hardware included
DMEG-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Base gusset for DMEX-16, no hardware included
DMEG-25
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Base gusset for DMEX-25, no hardware included
DMNP-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Nut plate for DMEX-08 or DMEX-16, screws not included
DMNP-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Nut plate for DMEX-08, DMEX-16 or DMEX-25, screws not included
DMNP-25
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Nut plate for DMEX-16 or DMEX-25, screws not included
DMTM-06
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Thruster mounting kit for DLT-06M
DMTM-08
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Thruster mounting kit for DLT-08M
DMTM-10
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Thruster mounting kit for DLT-10M
DMTM-12
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Thruster mounting kit for DLT-12M
DMTM-16
Consultare l'Ufficio Commerciale  
Stock: 
 
 
Thruster mounting kit for DLT-16M
† Tutti gli importi indicati in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >