Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Carrello  |  Contatto  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Heavy Weight Oil Flanged Immersion Heaters

TMO Series

Heavy Weight Oil Flanged Immersion Heaters | TMO Series

Heavy Weight Oil Flanged Immersion Heaters

Vedi tutti i modelli qui sotto

  • Rugged Steel Sheath
  • Low Watt Density 6 1/2" W/in2
  • 1.2 to 8.4 kW
  • 3 & 5 Inch, 150 Ib. Steel Flange
Riscaldatori ad immersione - Visualizza i prodotti correlati


More information about how a Immersion Heater works in this link or general information about industrial heater elements.

Rugged construction, Sturdy 0.475" diameter elements welded to steel flanges provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Heavy coil construction– Watt density on the heating coil is designed for low watt density operation by increasing the coil diameter and length to give maximum coil surface temperature, providing longer coil life.

Heating heavy, viscous oils reduces their viscosity, permitting better pumpability for transfer operations. Lowering the viscosity allows increased system flows for any given horsepower. Transfer system designs can employ smaller motor and drive components ensuring optimum system economy.

Preheating permits use of less expensive fuel oils, allows easier pumping and provides better atomization, increasing combustion efficiency.

Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW Dim. B
in. (cm)
Ib. (kg)
E1 General Purpose Enclosure1 Dim.N3
in. (cm)
3 Inch-150 Lb. Steel Flange, 3 Steel Sheath Elements — 6.5 W/in2
1.225 3/16 (64)17 (8)TMO-3012L/240V/3P1 (3)
1.6533 1/16 (84)18 (8)TMO-3016L/240V/3P1 (3)
240 9/16 (103)20 (9)TMO-3021L/**/3P1 (3)
2.548 1/16 (122)21 (10)TMO-3024L/240V/3P1 (3)
5 Inch-150 Lb. Steel Flange, 6 Steel Sheath Elements — 6.5 W/in2
1.518 1/16 (46)27 (12)TMO-6015L/240V/3P1 (3)
1.819 13/16 (50)30 (14)TMO-6018L/240V/3P1 (3)
2.425 3/16 (64)32 (15)TMO-6024L/240V/3P1 (3)
3.333 1/16 (84)33 (15)TMO-6033L/**/3P1 (3)
4.240 9/16 (103)34 (15)TMO-6042L/**/3P1 (3)
548 1/16 (122)37 (17)TMO-6049L/**/3P1 (3)
5.452 1/16 (132)38 (17)TMO-6054L/**/3P1 (3)
658 3/8 (148)40 (18)TMO-6060L/**/3P1 (3)
6.965 1/16 (165)42 (19)TMO-6069L/**/3P1 (3)
7.268 5/8 (174)43 (20)TMO-6072L/**/3P1 (3)
8.478 1/16 (198)46 (21)TMO-6084L/**/3P1 (3)
/** Designate voltage, i.e. insert 240V for 240 Vac or 480V for 480 Vac.
Note: Larger flange sizes and kW ratings and power supplies are available. contact OMEGALUX.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
3 E1 enclosure “N” designates conduit size, E2/E3/E4 enclosures “N” designates NPT threat size.
4 Weights:
    A. For Wt. of 3" flange with E2 enclosure, add 3 lbs. to Wt. of E1 enclosure.
    B. For Wt. of 5" flange with E3 or E4 enclosure, add 7 lbs. to Wt of E1 enclosure.
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Consultare l'Ufficio Commerciale  
Heater, 8.4 kW, 480 V, 6 steel sheath elements, 3 phase power
Tutti gli importi indicati in EUR

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto
Descrizione delle opzioni:

(1) Number of Steel Sheath Elements Seleziona da:
3 per 3 Steel Sheath Elements
6 per 6 Steel Sheath Elements

(2) Wattage Seleziona da:
012 per 1.2 kW
016 per 1.65 kW
021 per 2 kW
024 per 2.5 kW
015 per 1.5 kW
018 per 1.8 kW
024 per 2.4 kW
033 per 3.3 kW
042 per 4.2 kW
049 per 5 kW
054 per 5.4 kW
060 per 6 kW
069 per 6.9 kW
072 per 7.2 kW
084 per 8.4 kW

(3) Voltage Seleziona da:
240V per 240 V
480V per 480 V
Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.
We noticed you are from the US. Visit your local site for regional offers and live support.