Heavy Duty Explosion Resistant Heating Blankets

SEPHB Series

^€371,68 SEPHB-612-180-120-T3

INVIA ORDINE

Factory Mutual Hazardous Area Approval
Class I, Div 2, Groups A, B, C, and D; Class II, Div 2, Groups F and G
Integral Built-In High-Limit Thermal Cutout Prevents Temperature Runaway†
Optional Pressure Sensitive Adhesive Available
Moisture and Chemical Resistant
Maximum Exposure Temperature of 232°C (450°F)
APPLICATION
• Low-Temperature Ovens
• Process Vats and Dip Tanks
• Storage Tanks
• Hoppers, Dry Storage Bins, Coal Silos
• Conveyors

Riscaldatori flessibili - Visualizza i prodotti correlati

Descrizione

Find how Silicone heater elements work on this link or general information about industrial heater elements.

OMEGALUX™ silicone rubber heavy-duty heating blankets feature built-in high-limit thermal cutout protection, which, in the event of a primary temperature controller failure, maintains blanket sheath temperature below the minimum safe auto-ignition temperature of the material being heated or materials in the area. (“T Rating” in the National Electric Code, Section 500.)

OMEGALUX™ SEPHB Series blankets are flexible and readily conform to most plane and simple curved surfaces. Blankets are easy to install with optional factory applied pressure-sensitive adhesive, creating a permanent bond.

OMEGALUX™ SEPHB blankets are compatible with most chemical fluids and oils commonly encountered in field service. They are exceptionally resistant to weather, moisture, and effects of sunlight, and ozone gases, and they can be used in areas of high radioactivity.

SPECIFICATIONS
Wattage: 180, 360, 720 or 1440 W
Power: 120, 240 and 480 V (contact OMEGALUX™ for 480 V heaters)
Dielectric Strength: 2000 V
Watt Density: 2.5 W/in2

CAUTION AND WARNING! Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

High-Limit Thermostat Temperature
T4A	70°C (158°F)
T3	145°C (292°F)

Volts	Watts	Dimensions: mm (in)	Model No.
120	180	152 x 305 (6 x 12)	SEPHB-612-180-120-*
240	180	152 x 305 (6 x 12)	SEPHB-612-180-240-*
120	360	152 x 610 (6 x 24)	SEPHB-624-360-120-*
240	360	152 x 610 (6 x 24)	SEPHB-624-360-240-*
120	360	305 x 305 (12 x 12)	SEPHB-1212-360-120-*
240	360	305 x 305 (12 x 12)	SEPHB-1212-360-240-*
120	720	305 x 610 (12 x 24)	SEPHB-1224-720-120-*
240	720	305 x 610 (12 x 24)	SEPHB-1224-720-240-*
120	1440	610 x 610 (24 x 24)	SEPHB-2424-1440-120-*
240	1440	610 x 610 (24 x 24)	SEPHB-2424-1440-240-*

† Tutti gli importi indicati in EUR
Nota: Article 501 of the NEC requires that the maximum sheath temperature of the heater shall not exceed 80 percent of the auto-ignition temperature of the surrounding atmosphere when heater is continuously energized.
Auto-Ignition Temperature: The minimum temperature required to initiate or cause selfsustained combustion of a solid, liquid or gas independently of the heating or heated element (see NFPA 325M, Fire Hazard Properties of Flammable Liquids, Gases and Volatile Solids).

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

	(1)		(2)		(3)		(4)
SEPHB-		-		-		-

Descrizione delle opzioni:

(1) Dimension Seleziona da:
612 per 6 in x 12 in
624 per 6 in x 24 in
1212 per 12 in x 12 in
1224 per 12 in x 24 in
2424 per 24 in x 24 in

(2) Watt Seleziona da:
180 per 180 W
360 per 360 W
720 per 720 W
1440 per 1440 W

(3) Volt Seleziona da:
120 per 120 V
240 per 240V

(4) High-Limit Thermostat Temperature Rating Seleziona da:
T3 per 145°C (292°F)
T4A per 70°C (158°F)

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.