Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Linear pattern precision strain gauges with
minature and medium length grids
are for general purpose and stress
analysis applications. Available
with either two 1-meter leads or
three 3-meter leads and 120 Ω or
350 Ω resistance. All models are
compensated for steel.
The planar XY pattern (0 / 90°) allows
precision strain measurement by
eliminating the errors often
associated with a stacked XY
pattern. These strain gauges are available
with either two 1-meter leads or
three 3-meter leads per grid and
are compensated for steel.
The planar rosette pattern (0 / 45°/ 90°) allows
precision strain measurement
by eliminating the errors often
associated with a stacked pattern.
These strain gauges are available with
either two 1-meter leads or three
3-meter leads per grid and are
compensated for steel.
Specifications See Spec Sheet for full specifications Strain Gauge Construction Foil strain gauge with embedded measuring grid Measuring Grid Material Constantan Thickness µm (microinch) 3.8 or 5 (150 or 197), depending upon strain gauge type Carrier Material Polyimide Thickness µm (microinch) 45 ± 10 (1.772 ± 394) Connections PTFE wire, Ø - 0.051 mm², approximately 50 mm long, connected to AWG 28 ribbon cables (PVC insulated) through solder sleeves in 2- or 3-wire configurations Nominal Resistance Ω 120 or 350 depending upon gage Resistance Tolerance % ±0.35, with 0.6 mm and 1.5 mm grid length % ±1 Gauge Factor approximately 2 (stated on package) Gauge Factor Tolerance % ±1, with 0.6 mm and 1.5 mm grid length % ±1.5, temperature coefficient of gauge factor 1/K [1/°F] (115 ± 10) x 10-6 [(64 ± 5.5) x 10-6, nominal value of gauge factor temperature coefficient Specified on each package Applicable Bonding Materials Cold Cure Adhesives SG496, SG401 Heat Cure Adhesives TT300
† Tutti gli importi indicati in EUR Nota: * See Specifitions for Maximum permitted bridge energizing voltage (Vrms)