Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
A New I/O for OCS
SmartStix I/O is a new terminal-block style
I/O designed for use with the the XL series
Operator Control Station (OCS). It can be
used to expand the I/O capacity of any OCS,
and it is very cost effective as remote I/O.
SmartStix I/O connects to any OCS CsCAN
network port to provide the best I/O
selection for the application. And, output
modules feature Electronic Short-Circuit
Protection (ESCP).
Compact, DIN-Rail Mounted
SmartStix I/O is extremely compact,
providing 16 and 32 point digital I/O in a
package only 39 mm (1.5") deep and a
footprint of 50 H x 116 W mm (2 x 4.5") or
50 H x 177 W mm (2 x 7"). With its small
footprint, SmartStix I/O takes up very little
panel space whether located in the main
control panel or tucked away in a remote
location. SmartStix I/O has a barrier style
terminal strip and can be mounted on a
DIN-Rail. Plus, removable terminals make
field replacement fast and convenient.
Expands I/O Capacity, Local or Remote SmartStix I/O easily expands the I/O capacity
of any OCS utilising the CsCAN network port
available with every model. It is especially
cost effective when added to an XL Series
OCS. SmartStix I/O offers fast response
times without sacrificing robustness, with
no need for a costly I/O interface unit. In
addition to its peer-to-peer capabilities,
CsCAN is used as a highly efficient method
of distributing SmartStix I/O up to 1829 m
(6000')* away.
Easy to Set Up
SmartStix require minimal time and
complexity to configure. Just assign a
unique ID, connect the 5-wire screened cable
and you will be up and running in no time.
* Maximum distance is 457 m (1500') per segment, with up to 1829 m (6000') possible using repeaters.
SPECIFICATIONS Bus Protocol: CsCAN (control station controller area network)
Bus Connector: 5-position terminal strip
Maximum Distance: 457 m (1500') per segment; 4 segments max
Maximum Number of Total Nodes: 253
Module Configuration Method: Module ID set using two rotary switches
LED Indication: I/O status (one per point); power, module status, network status
Output Protection: Electronic shortcircuit protection (16 and 32 output modules only)
Product Certifications: CE (all models), UL (digital only)
ANALOGUE INPUTS Input Ranges: ±5V, ±10 Vdc, 4 to 20 mA, ±20 mA DC
Resolution: 14 bits
Accuracy@ 25°C: 0.1%
Input Impedance: 1 MΩ (voltage range), 150 Ω (mA range)
Isolation: 1000 Vdc IEC61010-1 300 VRMS
Maximum Continuous Overload: 150 Vac (±10V), ±30 mA (±20 mA), clamped at ±6V
DIGITAL INPUTS Rated Input Current: 7 mA
Rated Voltage: 11 to 25 Vdc
ON Voltage Level: 19 Vdc or less
OFF Voltage Level: 6 Vdc or less
Input Characteristics Bidirectional Isolation Method: Photo coupler
OFF to ON Response: 0 to 3 ms or less
ON to OFF Response: 0 to 3 ms or less
ANALOG OUTPUTS Output Ranges: ±5, ±10 Vdc, 4 to 20 mA, ±20 mA DC
Resolution: 14 bits
Accuracy@ 25°C: 0.1%
Load Resistance: 600 min (voltage), 500 max (mA)
Isolation: 1000 Vdc, IEC61010-1 300 VRMS
Output Characteristic: Sourcing
DIGITAL OUTPUTS Operating Voltage: 24 Vdc
Rated Load Voltage: 24 Vdc
Output Type: Sourcing
Maxload Current: 0.5 A max per output 3 A per common
OFF to ON Response: 2 mS
ON to OFF Response: 2 mS
RELAY OUTPUTS Rated Load Voltage: 24 Vdc, 220 Vac
Minimum Load Voltage/Current: 5 Vdc/1 mA
Maximum Load Current (Resistive): 2.0 A per channel, 5.0 A per common
OFF to ON Response: 10 mS max
ON to OFF Response: 12 mS max
Output Type: NO
Dimensions (Approx): 32 I/O, Analog I/O or Relay Output: 176 L x 48 D x 50 mm H(7 x 1.9 x 2")
16 I/O (Not Relay): 115 L x 48 D x 50 mm H(4.5 x 1.9 x 2")
† Tutti gli importi indicati in EUR Nota: SmartStix I/O module comes with a 5-pin terminal style network connector. An optional m12 adaptor for m12 cable sets is available. SmartStix I/O have removable terminals and can be DIN-rail mounted.