Dual Channel RS-232 PCMCIA Card

DSP-100

Vedi tutti i modelli qui sotto

INVIA ORDINE

PCMCIA PC Card Standard Specification 2.1 Compliant
Client Software Driver for DOS (PCMCIA Card Services Specification 2.1 Compatible)
“Hot-Swapping” Supported (Insertion and Removal of DSP-100 While System is Powered Up)
Selectable and Shareable Interrupt (IRQ 3-7, 9-12, 14, 15)
Selectable I/O Base Address

Descrizione

The DSP-100 is a dual channel RS-232 asynchronous serial adapter PCMCIA card which is PC Card Specification 2.1 compliant. The DSP-100 inserts into one Type II (5 mm) PCMCIA socket and provides two asynchronous RS-232 serial ports. These two serial ports are implemented with 16550 UARTs; this will allow the DSP-100 to be used in multitasking environments and for applications involving high data rates. The DSP-100 is accessed through standard D-9 connectors. Users may select the particular I/O address space at which the DSP-100 is to be located. The two serial ports of the DSP-100 may be configured at either the standard COM port I/O address locations or in a 16-byte continuous I/O address block. Also, the DSP-100 may be configured at any one interrupt level. An interrupt status register is provided for determining the serial port which was the source of the generated interrupt. Since the two serial ports must share one hardware interrupt level, an enhanced serial device driver is provided for Windows 3.1. The driver will allow two serial ports to share one hardware interrupt level. A configuration file is also provided for operation under Windows 95. In addition, a PCMCIA Card Services Version 2.1 compliant client driver for DOS is provided which will provide for automatic configuration of the DSP-100 upon each card insertion. This will permit the DSP-100 to be “hot-swapped”. The DSP-100 will be automatically configured upon each card insertion. A separate enabler program is provided for the configuration of the DSP-100 for those who wish to run the card without card and socket services installed.

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

DSP-100

Consultare l'Ufficio Commerciale

Stock:

Dual Channel RS232 PCMCIA card

† Tutti gli importi indicati in EUR
Nota: Comes with complete user’s manual and PCMCIA configuration/driver software on CD ROM. Also includes PCMCIA card to dual 9 pin connector cable.