Cookies del sito web Omega
Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
Vicino
Chiamaci
ora
Carrello  |  Contatto  | 
800 906 907  | 
NUMERO DI TELEFONO GRATUITO (solo dall'Italia) 800 906 907
INTERNAZIONALE+39 022 333 1521
Layer N Banner

Circulation Heaters for Deionized Water, Demineralized Water

CHF8 Series

Circulation Heaters | CHF8 Series

Circulation Heaters

Vedi tutti i modelli qui sotto

INVIA ORDINE
  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
Riscaldatori di circolazione - Visualizza i prodotti correlati

Descrizione

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion.
Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid.
Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2)—Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe Size Dimensional Drawing Number KW Model Number Approx Weight
120V 240V-1Ph (C*) 240V-3Ph (C*) 480V-1Ph (C*) 480V-3Ph (C*) lb kg
21⁄2 NPT 3 elements 2.2 2 — — CHF01100 (1) — CHF01101 (1) 37 17
2.3 3 — — CHF01102 (1) — CHF01101 (1) 46 21
3"—150 lb 3 elements 3.2 2 — — CHF01104 (1) — CHF01105 (1) 62 28
3.3 3 — — CHF01106 (1) — CHF01107 (1) 76 34
(C*) = Number of Branch Circuits per heater

60 watts/in2 (9.3 watts/cm2)—Typical Applications: Deionized Water, Demineralized Water
Nominal Pipe Size Model Number Dim Drawing Number KW Approx Weight
120V 240V-1Ph (C*) 240V-3Ph (C*) 480V-1Ph (C*) 480V-3Ph (C*) lb kg
2½ NPT 3 elements — CHF01996 (1) CHF01997 (1) CHF01998 (1) CHF01999 (1) 2.1 6 28 13
— CHF02000 (1) CHF02001 (1) CHF02002 (1) CHF02003 (1) 2.1 7.5 28 13
— CHF02004 (1) CHF02005 (1) CHF02006 (1) CHF02007 (1) 2.1 9 29 13
— — CHF02009 (1) CHF02010 (1) CHF02011 (1) 2.2 12 36 16
— — CHF02013 (1) CHF02014 (1) CHF02015 (1) 2.2 15 37 17
— — CHF02017 (1) CHF02018 (1) CHF02019 (1) 2.3 18 38 17
4"—150 lb 6 elements — — CHF02021 (1) CHF02022 (1) CHF02023 (1) 4.1 12 77 35
— — CHF02025 (1) CHF02026 (1) CHF02027 (1) 4.1 18 79 36
— — CHF02029 (2) CHF02030 (2) CHF02031 (1) 4.2 24 92 42
— — CHF02032 (2) CHF02033 (2) CHF02034 (1) 4.2 30 94 42
— — CHF02035 (2) CHF02036 (2) CHF02037 (1) 4.3 36 117 53
— — — — CHF02038 (2) 4.3 50 121 55
— — — — CHF02039 (2) 4.4 60 145 66
6"—150 lb 12 elements — CHF02040 (3) CHF02041 (2) CHF02042 (2) CHF02043 (1) 6.1 24 126 57
— CHF02044 (3) CHF02045 (2) CHF02046 (2) CHF02047 (1) 6.1 36 130 59
— — CHF02048 (4) CHF02049 (3) CHF02050 (2) 6.2 48 153 69
— — CHF02051 (4) CHF02052 (3) CHF02053 (2) 6.2 60 157 71
— — CHF02054 (4) — CHF02055 (2) 6.3 72 196 89
— — — — CHF02056 (4) 6.3 100 205 93
— — — — CHF02057 (4) 6.4 120 246 112
6"—150 lb 15 elements — CHF02058 (3) CHF02059 (5) CHF02060 (3) CHF02061 (1) 6.1 30 128 58
— CHF02062 (5) CHF02063 (5) CHF02064 (3) CHF02065 (5) 6.1 45 133 60
— — CHF02066 (5) CHF02067 (3) CHF02068 (5) 6.2 60 158 72
— — CHF02069 (5) CHF02070 (5) CHF02071 (5) 6.2 75 163 74
— — CHF02072 (5) — CHF02073 (5) 6.3 90 202 92
— — — — CHF02074 (5) 6.3 125 213 97
— — — — CHF02075 (5) 6.4 150 257 117
Ordering Example: CHF02005, 9 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Ordinare(Specificare il codice prodotto)
Codice prodotto/Desc.
Q.tá
Descrizione
Nominal Pipe Size; 2 1/2 NPT 3 elements
Nominal Pipe Size; 4''-150 lb Flange, 6 elements,
CHF02021
Consultare l'Ufficio Commerciale  
Stock: 
 
 
240V-3Ph, 12 KW, 77 lbs
Nominal Pipe Size; 6''-150 lb Flange, 15 elements,
CHF02072
Consultare l'Ufficio Commerciale  
Stock: 
 
 
240V-3Ph, 90 KW, 202 lbs
CHF02074
Consultare l'Ufficio Commerciale  
Stock: 
 
 
480V-3Ph, 125 KW, 213 lbs

Ordina per Codice Prodotto

Codice prodotto
Q.tá
Codice prodotto
Q.tá


† Tutti gli importi indicati in EUR
 Nota: (C*) = Number of Branch Circuits per heater.
 Esempio di Ordinazione: (1) CHF01996 240V-1Ph, 6 KW, 28 lbs Nominal Pipe Size; 2 1/2 NPT 3 elements, €6,030.22
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >