Cookies del sito web Omega Utilizziamo i cookies nel nostro sito web. Questi cookies sono necessari per consentire al sito web di funzionare correttamente. Se si continua senza modificare la propria configurazione del browser, si acconsente a ricevere i cookies dal nostro sito web. Per maggiori chiarimenti sull'utilizzo dei cookies, cliccare qui
AMP Series non-metallic polycarbonate
enclosures are designed to insulate and
protect electrical controls and components
in both indoor and outdoor applications
and are especially well suited for higher
temperatures and corrosive environments.
These IP66 rated plastic junction
boxes feature raised covers with a variety
of screw or latching options that allow you
to provide the level of security or ease of
access needed for each application.
Hinged models are constructed with a stainless
steel hinge pin and padlocking latches are
available in stainless steel or non-corrosive
plastic snap latches.
The AMP Series enclosures are well suitable
for mild acid conditions such as aluminium
chloride, boric acid, calcium chloride, sea
water, sodium nitrate and zinc chloride.
AMP Series plastic enclosures are
available with the added feature of a raised
cover. The cover adds an additional 22 mm
of depth to accommodate meters and
controllers, switches and other devices, and
can be used with the optional front panel
for maximum configuration within a single
"AMP-PLA" panels are 2.5 mm thick aluminium rear mount sub-panels
"SCE" panels are 2 mm thick, white powder coated, carbon steel for rear mounting
"OM-HFPP" panels are 2.3 mm thick aluminium front panels that can be mounted in the front of the box and are adjustable to 38 mm deep into the box.
Specifications Temperature Rating: -35 to 107°C UV Rating: f1 per UL 746C Internal Mounting: #10-32 threaded brass inserts for sub-panel, plastic bosses for DIN rail for #10 sheet metal screws Standards: UL50, UL50E, UL508A and UL706C UL Types: 1, 2, 3, 4, 4x, 12 and 13 CSA-C22: No. 14 CAN/CSA-C22: No.94 CSA Types: 1, 2, 3, 3R, 4 4X, 12 and 13 NEMA Types: 1, 2, 3, 3R, 4, 4X, 12 and 13 IEC 60529: Type IP66 Construction
Materials: Injection moulded polycarbonate thermoplastic Hinge: Moulded hinge with 304 stainless steel pin Colour: Light grey – RAL#7035 Cover Seal: Closed cell neoprene, in continuous tongue and grove channel
† Tutti gli importi indicati in EUR Esempio di Ordinazione: (1) AMP1206F Electrical enclosure, 12 H x 10 W x 6, €94.30 plus (1) SCE-12P10 Steel sub-panel for 10 x 10 enclosure, €14.58 , €94.30 + 14.58 = €108.88
(1) OM-HFPP142 Aluminum front panel for 14 x 12, €69.14 plus (1) DRTB-RAIL-12 Pre-cut DIN rail for 12, €9.77, €69.14 + 9.77 = €78.91
DIN Rail Terminal Blocks, Feed Through and Ground Terminals