Channel Strip Heater, Ceramic Insulated, 38.1 x 7.94 mm (1 1/2 x 5/16")

CSH3

Vedi tutti i modelli qui sotto

INVIA ORDINE

A Reliable Heat Source with Seamless Stainless Steel Sheath
Flat Surface Mounting Installations
Used in Hundreds of Industrial and Commercial Heating Applications
Ovens
Hot Plates
Dies
Molds
Drying
Melting
Baking
Incubators
Platens
Food Warmers
Air Heating
Sealing Bars
Thermoforming
Tank Heating

Riscaldatori Piatti - Visualizza i prodotti correlati

Descrizione

Click here if you want to know more about strip heaters.

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No.		Length		Wattage	Watt Density
Part numbers shown are for heaters with T4 Terminals and Mounting Tabs
120V	240V	inch	mm	Wattage	Watt/in²	Watt/cm²
CSH00338	CSH00339	5¹⁄₄	133.4	125	28	4
CSH00318	CSH00321	6	152.4	150	21	3
CSH00054	CSH00055	7¹⁄₂	190.5	150	15	2
CSH00056	CSH00057	7¹⁄₂	190.5	200	20	3
CSH00058	CSH00059	8	203.2	150	13	2
CSH00060	CSH00061	8	203.2	175	15	2
CSH00062	CSH00063	8	203.2	250	21	3
CSH00064	CSH00065	8	203.2	400	34	5
CSH00066	CSH00067	8	203.2	500	42	7
CSH00068	CSH00069	10¹⁄₂	266.7	250	12	2
CSH00070	CSH00071	10¹⁄₂	266.7	350	17	3
CSH00072	CSH00073	10¹⁄₂	266.7	400	19	3
CSH00074	CSH00075	12	304.8	250	10	1
CSH00076	CSH00077	12	304.8	350	13	2
CSH00078	CSH00079	12	304.8	500	19	3
CSH00080	CSH00081	14	355.6	300	9	1
CSH00082	CSH00083	14	355.6	500	15	2
CSH00084	CSH00085	15¹⁄₄	387.4	325	9	1
CSH00086	CSH00087	15¹⁄₄	387.4	500	13	2
CSH00088	CSH00089	17⁷⁄₈	454.2	350	7	1
CSH00090	CSH00091	17⁷⁄₈	454.2	375	8	1
CSH00092	CSH00093	17⁷⁄₈	454.2	500	11	2
CSH00094	CSH00095	17⁷⁄₈	454.2	750	16	2
CSH00096	CSH00097	17⁷⁄₈	454.2	1000	21	3
CSH00098	CSH00099	19¹⁄₂	495.3	350	7	1
CSH00100	CSH00101	19¹⁄₂	495.3	500	9	1
CSH00102	CSH00103	19¹⁄₂	495.3	750	14	2
CSH00104	CSH00105	19¹⁄₂	495.3	1000	19	3
CSH00329	CSH00333	19¹⁄₂	495.3	1200	23	4

Model No.		Length		Wattage	Watt Density
Part numbers shown are for heaters with T4 Terminals and Mounting Tabs
120V	240V	inch	mm	Wattage	Watt/in²	Watt/cm²
CSH00106	CSH00107	21	533.4	500	8	1
CSH00108	CSH00109	21	533.4	750	13	2
CSH00110	CSH00111	23³⁄₄	603.3	500	7	1
CSH00112	CSH00113	23³⁄₄	603.3	750	11	2
CSH00114	CSH00115	23³⁄₄	603.3	1000	15	2
CSH00116	CSH00117	23³⁄₄	603.3	1500	22	3
CSH00118	CSH00119	25¹⁄₂	647.7	500	7	1
CSH00120	CSH00121	25¹⁄₂	647.7	750	10	2
CSH00122	CSH00123	25¹⁄₂	647.7	1000	13	2
CSH00124	CSH00125	26³⁄₄	679.5	700	9	1
CSH00126	CSH00127	26³⁄₄	679.5	750	9	1
CSH00128	CSH00129	26³⁄₄	679.5	1000	13	2
CSH00130	CSH00131	29¹⁄₄	743.0	750	8	1
CSH00132	CSH00133	30¹⁄₂	774.7	750	8	1
CSH00134	CSH00135	30¹⁄₂	774.7	1000	11	2
—	CSH00136	30¹⁄₂	774.7	1250	13	2
CSH00137	CSH00138	33¹⁄₂	850.9	750	7	1
CSH00139	CSH00140	34⁵⁄₈	879.5	1000	9	1
CSH00141	CSH00142	35⁷⁄₈	911.4	1000	9	1
CSH00143	CSH00144	35⁷⁄₈	911.4	1500	13	2
CSH00145	CSH00146	37¹⁄₄	946.2	1500	13	2
CSH00147	CSH00148	38¹⁄₂	977.9	800	7	1
CSH00149	CSH00150	38¹⁄₂	977.9	1000	8	1
CSH00151	CSH00152	38¹⁄₂	977.9	1500	12	2
CSH00153	CSH00154	42¹⁄₂	1079.5	1250	9	1
CSH00155	CSH00156	42¹⁄₂	1079.5	1500	11	2
—	CSH00157	47⁷⁄₈	1216.2	1350	9	1
—	CSH00158	47⁷⁄₈	1216.2	2250	14	2

Model No.		Length		Wattage	Watt Density
Part numbers shown are for heaters with T3 Terminals and Mounting Tabs
120V	240V	inch	mm	Wattage	Watt/in²	Watt/cm²
CSH00336	CSH00337	5¹⁄₄	133.4	125	28	4
CSH00159	CSH00160	5¹⁄₂	139.7	125	23	4
CSH00161	CSH00162	5¹⁄₂	139.7	250	46	7
CSH00163	CSH00164	5³⁄₄	146.1	300	47	7
CSH00165	CSH00166	6	152.4	150	21	3
CSH00167	CSH00168	6	152.4	300	41	6
CSH00169	CSH00170	8	203.2	150	10	2
CSH00323	CSH00324	8	203.2	500	32	5
CSH00172	CSH00173	10¹⁄₂	266.7	250	11	2
CSH00346	CSH00174	12	304.8	350	12	2
CSH00175	CSH00176	14	355.6	500	14	2
CSH00177	CSH00178	17⁷⁄₈	454.2	750	15	2
CSH00328	CSH00332	19¹⁄₂	495.3	1200	21	3
CSH00179	CSH00180	23³⁄₄	603.3	750	10	2
CSH00181	CSH00182	29¹⁄₄	743.0	750	8	1
CSH00183	CSH00184	34⁵⁄₈	879.5	1000	9	1
CSH00185	CSH00186	35⁷⁄₈	911.4	1000	9	1
CSH00187	CSH00188	37¹⁄₄	946.2	1500	12	2