Channel Strip Heater, Ceramic Insulated, 25.4 x 16 mm (1 x 5/16")

CSH2

Vedi tutti i modelli qui sotto

INVIA ORDINE

A Reliable Heat Source with Seamless Stainless Steel Sheath
Flat Surface Mounting Installations
Used in Hundreds of Industrial and Commercial Heating Applications
Ovens
Hot Plates
Dies
Molds
Drying
Melting
Baking
Incubators
Platens
Food Warmers
Welding Preheating
Air Heating
Sealing Bars
Thermoforming
Tank Heating

Riscaldatori Piatti - Visualizza i prodotti correlati

Descrizione

Click here if you want to know more about strip heaters.

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No.		Length		Wattage	Watt Density
120V	240V	in	mm	Wattage	Watt/in²	Watt/cm²
CSH00021	—	8	203.2	250	13	2
CSH00022	—	9½	241.3	300	13	2
CSH00023	—	11	279.4	350	13	2
CSH00024	CSH00025	12	304.8	400	13	2
CSH00026	CSH00027	14	355.6	450	13	2
CSH00028	CSH00029	15¹⁄₄	387.4	500	13	2
CSH00030	CSH00031	17⁷⁄₈	454.0	600	13	2
CSH00032	CSH00033	19½	495.3	600	12	2
CSH00034	CSH00035	21	533.4	750	14	2
CSH00036	CSH00037	22½	571.5	750	13	2
CSH00038	CSH00039	23³⁄₄	603.3	800	13	2
CSH00040	CSH00041	25½	647.7	900	14	2
CSH00042	CSH00043	27½	698.5	900	13	2
CSH00044	CSH00045	28³⁄₄	730.3	1000	13	2
CSH00046	CSH00047	30½	774.7	1000	13	2
CSH00048	CSH00049	33½	850.9	1000	12	2
CSH00050	CSH00051	35⁷⁄₈	911.2	1000	11	2
CSH00052	CSH00053	38½	977.9	1250	13	2

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

Ordina per Codice Prodotto

Codice prodotto

Q.tá

Codice prodotto

Q.tá

† Tutti gli importi indicati in EUR
Nota: Part numbers shown are for heaters with T2 Terminals and Mounting Tabs.