- Discontinued Channel Strip Heater, Ceramic Insulated, 15.88 x 6.35 mm (5/8 x 1/4")

CSH1

CSH1 SERIES Channel Strip Heater, Ceramic Insulated

Vedi tutti i modelli qui sotto

INVIA ORDINE

A Reliable Heat Source with Seamless Stainless Steel Sheath
Flat Surface Mounting Installations
Used in Hundreds of Industrial and Commercial Heating Applications
Ovens
Hot Plates
Dies
Molds
Drying
Melting
Baking
Incubators
Platens
Food Warmers
Welding Preheating
Air Heating
Sealing Bars
Thermoforming
Tank Heating

Riscaldatori Piatti - Visualizza i prodotti correlati

Descrizione

Click here if you want to know more about strip heaters.

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No.		Length		Wattage	Watt Density		Type
120V	240V	in	mm	Wattage	Watt/in²	Watt/cm²	Type
CSH00001	—	1¹⁄₂	38.1	50	29	4	L
CSH00002	—	2	50.8	50	19	3	L
—	CSH00003	3	76.2	150	34	5	L
—	CSH00004	3	76.2	150	34	5	L1
CSH00005	—	4	101.6	200	33	5	L
CSH00006	—	5	127.0	240	30	5	L
CSH00007	CSH00008	5	127.0	240	30	5	L1
CSH00009	—	7	177.8	250	22	3	L1
CSH00010	CSH00011	9	228.6	350	24	4	L
CSH00012	—	9	228.6	350	24	4	L1
—	CSH00013	12	304.8	500	25	4	L
CSH00014	—	13	330.2	500	23	4	L
—	CSH00015	14	355.6	550	23	4	L1
CSH00016	—	18	457.2	900	29	5	L
CSH00017	CSH00018	18	457.2	900	29	5	L1
CSH00019	CSH00020	20	508.0	1000	29	5	L1

Ordinare(Specificare il codice prodotto)

Codice prodotto/Desc.

Q.tá

Descrizione

CSH00001