General Purpose Industrial Grade Accelerometers

ACC101

accelerometers

Vedi tutti i modelli qui sotto

INVIA ORDINE

Industrial Accelerometers
Ideal for Machine Vibration Monitoring
Low Impedance Drives Cable Lengths to 300 metres
Fast Turn-on Time (1 Sec.)
100 mV/g Output

Misurazione dinamica - Visualizza i prodotti correlati

Descrizione

Find how an accelerometer works on this link.

The ACC101 accelerometer is low cost yet extremely durable. These accelerometers are constructed using high strength aluminium, and feature a rugged strain relief, ¼-28 stud mounting, an epoxy seal, and use the kind of dependable components usually found only in higher priced accelerometers.

SPECIFICATIONS
Excitation: 2 mA nominal @ 24 to 30 Vdc, constant current (18 volt supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal @ 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±10 % rated output shift)
Amplitude Range: ±80 g peak with ACC-PS3A power supply/amplifier
Amplitude Linearity: ±1% up to 65 g peak
Temperature Range: -18 to 82°C
Temperature Sensitivity Effect:
-54 to 38°C ≤ 5% FS
38 to 121°C ≤ 8% FS
Thermal Shock: 1.2 g /°C
Transverse Sensitivity: 5% of axial maximum
Maximum g Without Damage: 5,000 g peak
Maximum g Without Clipping: ±80 g peak
Mounted Resonance Frequency: >18 kHz
Output Impedance: 50 Ω nominal
Bias Voltage: 10 V nominal
Base Strain: 0.002 g/microstrain max.
Noise Floor (wideband): 0.00025 g (rms)
Weight: 50 grams nominal (without cable)
Material: Aluminium, hard anodised thermal insulating boot included
Dimensions: 3.81 H x 2.54 cm hex base
Connector: 3 metre integral coaxial cable with BNCM
Mounting: 1/4-28 removable stud
Mounting Torque max: 40 cm-kg (35 in-lb)

Ordinare(Specificare il codice prodotto)

Quello che altre persone hanno comprato: Quando vedi questa icona, fai clic su di essa per espandere un elenco di prodotti che altre persone hanno comprato quando hanno acquistato questo modello.

Codice prodotto/Desc.

Q.tá

Descrizione

ACC101

Consultare l'Ufficio Commerciale

Stock:

Accelerometer with 3 metre cable

Accessories

MAGNET1

€124.62

Stock: 1 settimana

Magnetic mounting base 4.5 kg holding force (10 lb) 19 mm diameter x 19 mm high.

Amplifiers and Power Supplies

ACC-PS3A-230VAC

Consultare l'Ufficio Commerciale

Stock:

230 Vac powered constant current power supply (BNCF connections)

Interface cables used between power supply and instrumentation

ACC-CB4-6

Consultare l'Ufficio Commerciale

Stock:

1.8 metre long coaxial cable (BNCM/BNCM)

ACC-CB4-15

€82.21

Stock: 1 settimana

4.5 metre long coaxial cable (BNCM/BNCM)

ACC-CB5-2

€71.39

Stock: 8 settimane

60 cm long coaxial cable (BNCM/banana plug)

ACC-CB6

€31.80

Stock: 1 settimana

175 mm long coaxial cable (BNCM/pigtail)

† Tutti gli importi indicati in EUR
Esempio di Ordinazione: (1) ACC-CB5-2 60 cm long output cable for amplifer. BNC to banana plugs, €71.39