Wedge Flow Meter | Differential Pressure Design - Discontinued

FW1000 Series

Vedi tutti i modelli qui sotto

INVIA ORDINE

No Required Inlet or Outlet Straight Plumbing
±2% Full Scale Accuracy
±0.5% Full Scale Repeatability
Compact and Rugged
Linear Analog Output

Descrizione

The FW1000 Series has been discontinued. Please see the FDT7000 Series as a possible alternative or contact our Flow Engineering Department.

The FW1000 series are minimally invasive, low-cost segmented wedge flow sensors. The segmented wedge element provides a simple and reliable restriction for sensing flow as related to pressure differential. The FW1000 design allows users to install the meter in any full pipe orientation (horizontal, vertical or inverted). It is compact and rugged measuring less than 254 mm (10") long and 89 mm (3½") wide, with a flanged mounting base for simple installation. This series is offered with several ranges of calibration to accommodate the requirements typical to process water applications. Three standard NPT port sizes are available to accommodate installations. The standard unit can also be converted to a 1 to 10 Vdc output in the field.

SPECIFICATIONS
Accuracy: ±2% of full-scale
Repeatability: ±½% of full-scale
Maximum Operating Pressure: 8.6 bar (125 psig) Maximum Operating Temperature: 76°C (170°F)
Standard Test Media: Tap water @ 21°C (70°F)
Electronic Output: 0 to 5 Vdc (standard), 4 to 20 mA (optional)
Power Requirements: 12 to 35 Vdc
Flow Measuring Range: 0.5 to 15 GPM (1.9 to 57 LPM) full-scale
Turn Down Ratio: 10:1
Maximum Current Consumption: <50 m ADC
Minimum Load Resistance: 1000 Ω
Maximum Transmission Distance: <61m (<200')
Resolution: Infinite
Response Time:<500 mS to 90% (step change)
Protection: Short circuit, transient and reverse polarity
End Ports: PVC
Wedge Element: PVC
Pressure Sensor: Polyetherimide
Electrical Enclosure: Polycarbonate

† Tutti gli importi indicati in EUR
Nota: Comes complete with operator's manual.
Esempio di Ordinazione: (1) DPF64 Digital rate meter, €393.21 plus (1) TX4-100 Multi conductor wire, €49.97, €393.21 + 49.97 = €443.18

Combinare codice prodotto

Costruisci il Tuo Codice Prodotto Qui Sotto

	(1)	(2)	(3)
FW1

Descrizione delle opzioni:

(1) Fittings Seleziona da:
1 per 3/8 NPT
2 per 1/2 NPT
3 per 3/4 NPT

(2) Range Seleziona da:
05 per 0.5 to 5 gpm
10 per 1 to 10 gpm
15 per 1 to 15 gpm

(3) Output Seleziona da:
Niente (lasciare il campo vuoto) per 0 to 5 Vdc
-I per 4 to 20 mA

Nota: Non tutte le combinazioni possono essere valide, controlla il foglio delle specifiche per codici prodotti corretti.