FTB2000 Series
Economical Flowrate Sensors
Vedi tutti i modelli qui sotto
-
Measures Low Liquid Flow Rates of 0.5 to 29.9 l/m
-
FDA Approved Materials
-
Lightweight Plastic Design Permits Mounting in Any Position
-
FTBMC2005 has 2-30l/m range. 3/8"BSPP fitting and 1m cable
-
FTB2000 models have 3/8" NPT fitting and spade terminals for electrical connection.
Descrizione
This product is discontinued and is replaced by
BV1000-2000-3000-Series
More information about how a Flow meter works in this link.
The FTB2000 series Hall-effect turbine flowrate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost, coupled with 1/2 % repeatability, makes it an ideal candidate for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.
SPECIFICATIONS:
Wetted Materials
Accuracy: ±3% of reading
Repeatability: 0.5% of full scale
Body: Nylon 12
Turbine: Nylon 12 Composite
Bearings: PTFE/15% Graphite
Operating Pressure: 13.7 bar
Operating Temperature: -20 to 100°C
Viscosity: 32 to 81 SSU (.8 to 16 centistokes)
Filter: <50 microns Input
Power: 5 to 24 Vdc @ 8 mA
Output: NPN Sinking Open Collector @ 50 mA Maximum (1 to 2.2 K Ohm Pull-Up Resistor Required) (Hz Output)
Electrical Connection: FTBMC2005 model: 1m Cable. IP65 rated. FTB Models: Spade Terminals 2.8/6.3 x 0.8 mm (0.110/.248 x 0.031")
Inlet/Outlet Ports: FTBMC2005 model: 3/8" BSPP (G 3/8) Male FTB Models: 3/8" NPT Male
Vicino
